Jump to content

Recommended Posts

Posted

I tried what you told me, it’s the Geforce coming out now.

I’m doing some games, it looks like it’s getting better, there’s even a game where I shot at 200fps,

but there were few people,

I will try tomorrow when the server is full :)

 

Here is the config:

1582085499-2.png

 

1582085501-3.png

1582085504-2020-02-19-050844-capuzzo.jpg

 

However, I do not have the bar as you have on your battery, do you know how to display it please?

 

1582085497-1.png

 

Posted

Im having same fps problems also. but i have amd :( so idk if this will help me ether. Hope you get yours fixed :D 

  • Like 1
Posted
On 2/18/2020 at 12:45 AM, Young Fox said:

Hi all !

I'm here to ask for help because after trying several methods, my problem hasn't improved.

I thought it came from the server, when many people were connected at the same time, but I can observe a variation of my pings, which range from 40 to 125 ... Connection is also a problem I think, but the most serious , these are my FPS ..

If anyone knows how to fix this, it would be great ... Especially since Enemy Territory is an old game, I don't understand why I hang around so much.

 

My configs:

 

PC:

Predator Helios 300 -

Geforce GTX 1060:

-Driver version: : 442.19

-Driver type : Standard

-API version Direct 3D : 12

-Level of functionality : 12_1

-CUDA core : 1280

-Graphic clock: : 1455 MHz

-Memory data rate : 8.01 GBit/s

-Memory interface : 192 bits

-Memory bandwidth : 192.19 Go/s

-Total available graphic memory : 14 277 Mo

-Dedicated video memory : 6144 Mo of GDDR5

-System video memory : 0 Mo

-Shared system memory : 8133 Mo

-Vidéo Version Bios : I prefer not to put it, but if it is necessary and safe, tell me and I would edit my post

-IRQ : Not Used

-Bus : PCI Express x16 Gen3

-Device ID : //

-Reference : // 

 

No DVI or DisplayPort input

 

1581980492-1.png

 

1581979013-2.png

 

1581979015-3.png

Parameters: 

-Image Sharpening : Sharpening Off

-Anti-aliasing, FXAA : Disable

-Anti-aliasing, correction gamma : Enable

-Anti-aliasing, mode : Improved application parameters

-Anti-aliasing, setting : 2x

-Anti-aliasing, transparency : Disable

-CUDA, graphics processor : All

-Shade cache : Enable

-Anisotropic filtering : Controlling by application

-Texture filtering - LOD negative distortion : To allow

-Optimization of anisotropic samples : Enable

-Texture filtering, quality : High performance

-Texture filtering, trilinear optimization: Enable

-Max Frame Rate : Off

-Power management mode : Optimized power

-Multi-Frames sampled AA (MFAA) : Enable

-Ambient occlusion : Performance

-Threaded optimization : Enable

-Open GL rendering graphics processor : GeForce GTX 1060

-Vertical synchronization : Use the 3D application settings

-Prefabricated frames, virtual reality : 1

-Triple bet, memory buffer : Disable

 

1581979017-4.png

 

Specify the parameters of this program:

-Image Sharpening : Use the global parameter (off)

-Anti-aliasing, FXAA : Use the global parameter (disable)

-Anti-aliasing, correction gamma : Use the global parameter (enable)

-Anti-aliasing, mode : Use the global parameter (Improve the application setting)

-Anti-aliasing, setting : Use the global parameter (2x)

-Anti-aliasing, transparency : Use the global parameter (disable)

-CUDA, graphics processor : Use the global parameter (All)

-Shade cache : Use the global parameter (enable)

-Anisotropic filtering : Use the global parameter (Controlling by app)

-Texture filtering - LOD negative distortion : Use the global parameter (to allow)

-Optimization of anisotropic samples : Use the global parameter (enable) 

-Texture filtering, quality Use the global parameter (High Performance)

-Texture filtering, trilinear optimization: Use the global parameter (enable)

-Max Frame Rate : Off

-Power management mode : Focused on maximum performance

-Multi-Frames sampled AA (MFAA) : Enable

-Ambient occlusion : Non supported

-Threaded optimization : Enable

-Open GL rendering graphics processor : GeForce GTX 1060

-Vertical synchronization : Enable

-Prefabricated frames, virtual reality : Use the global parameter (1)

-Triple bet, memory buffer : Use the global parameter (Disable)

 

(Bold: when I changed the setting)

 

 

Configs ET : 

 

/com_maxfps : 125

/com_soundmegs : 32

/com_zonemegs : 64

/com_hunkmegs : 128 (or 192)

/rate : 25000 (I tried with > 25000/34000/45000/50000/70000

/snaps : 20 (I tried with > 25/40 too)

/cl_maxpackets : 100 (I tried with > 30/120 too) 

/cl_timenudge : 0 (I tried with > -5/-10/-15/-20/-30/ or 5/10/15/20...) 

/r_picimip : 1 (I tried with 2 too) 

/r_customheight : 1080

/r_customwidth  : 1920

/r_mode : -1

 

All that is "decorative" (effect, blood, etc.) : Off

Quality at a minimum in general...

 

 

 

 

I'm putting a little clip for you so you can see what I see at stake.

Everything is jerky ...

 

What is weird is that in the "Replay" mode, all these lags are no longer there.

Do you think there is a solution? Or do I just have a crappy PC ..? ^^ 

 

Thank you, 

Fox.

 

I would try to disable detailed texture and set r_pcmip to 3.

I have an gtx 1050 ti and no Problem but i use display port. 

  • Thanks 1
  • Administrators
Posted
11 hours ago, Young Fox said:

However, I do not have the bar as you have on your battery, do you know how to display it please?

 

Try changing from control panel as per your needs - 

 

image.png

 

I have modified as per my needs. 

 

Try below config - plain and simple - 

//connection
set rate 45000
set cl_maxpackets 125
set cl_timenudge 0
set cl_packetdup 0
//set cl_nodelta 1
set cg_autoRate 1

//pb - Mod anti cheats does much better job
pb_cl_disable

//download settings
set cl_allowdownload 1
set cl_wwwDownload 1

//hunk settings
set com_hunkmegs 192 // legacy render 2 - use higher hunk
set com_soundmegs 192

//video settings
set r_primitives 0
set r_picmip 0
set com_maxpfs 125 // pick u stable FPS
set r_fastsky 1
set r_texturebits 16
set r_dynamiclight 1

//resolution
//set r_customaspect 1
set r_mode 4
//set r_customwidth 1920
//set r_customheight 1080
set r_fullscreen  1

//gameplay settings
set cg_bloodFlash 0
set cg_bloodDamageBlend 0
set cg_bloodTime 0
set cg_bobpitch 0
set cg_bobroll 0
set cg_bobup 0
set cg_bobyaw 0
set cg_brassTime 0
set cg_coronas 0
set cg_drawFPS 1
set cg_enableBreath 0
set cg_runpitch 0
set cg_runroll 0
set cg_showblood 0
set cg_atmosphericEffects 0
set cg_wolfparticles 0
set cg_teamChatTime 4000
set cg_muzzleFlash 0
set cg_pmsounds 1
set cg_autoReload 1
set cg_lagometer 1
set cg_coronafardist 0
set cg_markTime 0
set cg_drawRoundTimer 1
set cg_drawReinforcementTime 1

//mouse - Y axis mouse acceleration
set m_pitch 0.014

exec adminbinds.cfg

 

  • Like 1
  • Thanks 1
Posted
7 hours ago, THE BEAST said:

Im having same fps problems also. but i have amd :( so idk if this will help me ether. Hope you get yours fixed :D 

try to rename et > quake3.exe

I heard it helps to identify et as a game for AMD Catalyst or something like that:D

  • Like 1
  • Administrators
Posted
2 minutes ago, Siwex89 said:

I heard it helps to identify et as a game for AMD Catalyst or something like that:D

Seriously? AMD has coding done on process name? :D I like their lazy developers hehe 

Posted
4 minutes ago, daredevil said:

Seriously? AMD has coding done on process name? :D I like their lazy developers hehe 

:crazy

work.jpg

 

  • Like 1
Posted

@daredevil 

 

 

Well, in terms of fluidity, it's great, I do not want to get too far, but I think it's already much better, in terms of FPS.

Now, the connection is also important there, and that, apart from moving, I don't see a solution ^^

 

/cl_timenudge does not seem to have an effect, I have the impression that it makes my situation worse, on the contrary

 

Thank you anyway  !

  • Administrators
Posted
25 minutes ago, Young Fox said:

Now, the connection is also important there, and that, apart from moving, I don't see a solution ^^

 

FPS, Rate and cl_maxpackets - play role together. Your accuracy will go much higher when you play at stable FPS at 125 or even 144. 

  • Like 1
Posted (edited)

Infact it depends on the card, and the number of players, sometimes it stays frozen at 125, other times it varies now between 90 and 125, if I put 200, it goes between 125 and 200 ..

For the connection, I tried everything, with different combinations, example:
/rate 20000/25000/45000/50000
/macpakcet 120/125

and /maxfps at 60 (front) / 125/150/200 ..

But I don't seem to see a difference ..

 

Knowning : I'm with a CPL (connection that goes through the walls) or wifi .. I can't put a cable because I'm not alone at home, and that displeases some xD

My cable Ethernet connected to my CPL, is a CAT6

Edited by Young Fox
Posted
53 minutes ago, Young Fox said:

Knowning : I'm with a CPL (connection that goes through the walls) or wifi .. I can't put a cable because I'm not alone at home, and that displeases some xD

My cable Ethernet connected to my CPL, is a CAT6

There is your problem. Not enough bandwith for you.

  • Like 1
  • Administrators
Posted
1 hour ago, Young Fox said:

/rate 20000/25000/45000/50000
/macpakcet 120/125

125 if you are on ETL. 

 

100 if you are using ET. 

 

Rate 30000 and let it ride up with cg_autorate for jaymod. @Barn!e had issues with higher rate as well I believe. Tagging him so he can share his wisdom. 

 

For me 40000 is must for smooth lagometer. I set certain value and then let jaymod code handle it up. We did something similar in silent mod as well. 

Posted

Super, thank you for this clarification, I will try ..
I'm using the original Enemy Territory, so this will be /cl_maxpackets 100 for me.

I'm waiting for @Barn!e's answer in this case :)

 

Thank you boss, I'll keep you informed

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.