Young Fox Posted February 17, 2020 Share Posted February 17, 2020 Hi all ! I'm here to ask for help because after trying several methods, my problem hasn't improved. I thought it came from the server, when many people were connected at the same time, but I can observe a variation of my pings, which range from 40 to 125 ... Connection is also a problem I think, but the most serious , these are my FPS .. If anyone knows how to fix this, it would be great ... Especially since Enemy Territory is an old game, I don't understand why I hang around so much. My configs: PC: Predator Helios 300 - Geforce GTX 1060: -Driver version: : 442.19 -Driver type : Standard -API version Direct 3D : 12 -Level of functionality : 12_1 -CUDA core : 1280 -Graphic clock: : 1455 MHz -Memory data rate : 8.01 GBit/s -Memory interface : 192 bits -Memory bandwidth : 192.19 Go/s -Total available graphic memory : 14 277 Mo -Dedicated video memory : 6144 Mo of GDDR5 -System video memory : 0 Mo -Shared system memory : 8133 Mo -Vidéo Version Bios : I prefer not to put it, but if it is necessary and safe, tell me and I would edit my post -IRQ : Not Used -Bus : PCI Express x16 Gen3 -Device ID : // -Reference : // No DVI or DisplayPort input Parameters: -Image Sharpening : Sharpening Off -Anti-aliasing, FXAA : Disable -Anti-aliasing, correction gamma : Enable -Anti-aliasing, mode : Improved application parameters -Anti-aliasing, setting : 2x -Anti-aliasing, transparency : Disable -CUDA, graphics processor : All -Shade cache : Enable -Anisotropic filtering : Controlling by application -Texture filtering - LOD negative distortion : To allow -Optimization of anisotropic samples : Enable -Texture filtering, quality : High performance -Texture filtering, trilinear optimization: Enable -Max Frame Rate : Off -Power management mode : Optimized power -Multi-Frames sampled AA (MFAA) : Enable -Ambient occlusion : Performance -Threaded optimization : Enable -Open GL rendering graphics processor : GeForce GTX 1060 -Vertical synchronization : Use the 3D application settings -Prefabricated frames, virtual reality : 1 -Triple bet, memory buffer : Disable Specify the parameters of this program: -Image Sharpening : Use the global parameter (off) -Anti-aliasing, FXAA : Use the global parameter (disable) -Anti-aliasing, correction gamma : Use the global parameter (enable) -Anti-aliasing, mode : Use the global parameter (Improve the application setting) -Anti-aliasing, setting : Use the global parameter (2x) -Anti-aliasing, transparency : Use the global parameter (disable) -CUDA, graphics processor : Use the global parameter (All) -Shade cache : Use the global parameter (enable) -Anisotropic filtering : Use the global parameter (Controlling by app) -Texture filtering - LOD negative distortion : Use the global parameter (to allow) -Optimization of anisotropic samples : Use the global parameter (enable) -Texture filtering, quality : Use the global parameter (High Performance) -Texture filtering, trilinear optimization: Use the global parameter (enable) -Max Frame Rate : Off -Power management mode : Focused on maximum performance -Multi-Frames sampled AA (MFAA) : Enable -Ambient occlusion : Non supported -Threaded optimization : Enable -Open GL rendering graphics processor : GeForce GTX 1060 -Vertical synchronization : Enable -Prefabricated frames, virtual reality : Use the global parameter (1) -Triple bet, memory buffer : Use the global parameter (Disable) (Bold: when I changed the setting) Configs ET : /com_maxfps : 125 /com_soundmegs : 32 /com_zonemegs : 64 /com_hunkmegs : 128 (or 192) /rate : 25000 (I tried with > 25000/34000/45000/50000/70000 /snaps : 20 (I tried with > 25/40 too) /cl_maxpackets : 100 (I tried with > 30/120 too) /cl_timenudge : 0 (I tried with > -5/-10/-15/-20/-30/ or 5/10/15/20...) /r_picimip : 1 (I tried with 2 too) /r_customheight : 1080 /r_customwidth : 1920 /r_mode : -1 All that is "decorative" (effect, blood, etc.) : Off Quality at a minimum in general... I'm putting a little clip for you so you can see what I see at stake. Everything is jerky ... What is weird is that in the "Replay" mode, all these lags are no longer there. Do you think there is a solution? Or do I just have a crappy PC ..? ^^ Thank you, Fox. Quote Link to comment Share on other sites More sharing options...
dasp Posted February 18, 2020 Share Posted February 18, 2020 I have the same with the fps, always changing. But I think that is just because of the maps you are playing, the smoke, airstrikes, etc 1 Quote Link to comment Share on other sites More sharing options...
Young Fox Posted February 18, 2020 Author Share Posted February 18, 2020 (edited) So linked to performance .. Weird all the same, the game is old and the GTX is not supposed to be bad, the PC cost me 1400 euros :p No solutions? Edited February 18, 2020 by Young Fox Quote Link to comment Share on other sites More sharing options...
dasp Posted February 18, 2020 Share Posted February 18, 2020 (edited) 9 minutes ago, Young Fox said: So linked to performance .. Weird all the same, the game is old and the GTX is not supposed to be bad, the PC cost me 1400 euros: p No solutions? I would say is an combination of graphics card, cpu and ram. In my case everything sucks 😂 I just upgraded the graphics card, now most of the time I have 125fps, but not always, if there is too much going on on the map it drops to around 75fps. But my pc is very old, probably around 13 years old. 😂 Edited February 18, 2020 by dasp 1 Quote Link to comment Share on other sites More sharing options...
MikeSlayer Posted February 18, 2020 Share Posted February 18, 2020 /r_primitives 2 Quote Link to comment Share on other sites More sharing options...
Young Fox Posted February 18, 2020 Author Share Posted February 18, 2020 (edited) Lol it must not be simple actually 😛 @dasp No, have nothing, I'm already in r_primitives 2 .. but thank you ! @MikeSlayer But I think I found, on the window of application parameters, instead of OBS studio, I put Wolfenstein Enemy territory, since, I have the impression that I play at slow speed ^^ The only remaining problem is that now I'm constantly stuck at 60fps, not 125 .. if someone has an idea, I'm interested 😛 Edited February 18, 2020 by Young Fox Quote Link to comment Share on other sites More sharing options...
MikeSlayer Posted February 18, 2020 Share Posted February 18, 2020 (edited) turn off v sync -Vertical synchronization : Enable - set to disable or in etcfg /r_finish 0 Edited February 18, 2020 by MikeSlayer 1 Quote Link to comment Share on other sites More sharing options...
w1cx Posted February 18, 2020 Share Posted February 18, 2020 1 hour ago, Young Fox said: Lol it must not be simple actually 😛 @dasp No, have nothing, I'm already in r_primitives 2 .. but thank you ! @MikeSlayer But I think I found, on the window of application parameters, instead of OBS studio, I put Wolfenstein Enemy territory, since, I have the impression that I play at slow speed ^^ The only remaining problem is that now I'm constantly stuck at 60fps, not 125 .. if someone has an idea, I'm interested 😛 Are you recording directly via obs while you play? 1 Quote Link to comment Share on other sites More sharing options...
Young Fox Posted February 18, 2020 Author Share Posted February 18, 2020 (edited) @MikeSlayer Indeed, it was horizontal synchronization It’s okay, I’m turning at 125 fps. Much smoother I have the impression. I’m waiting to see in the next few days if it still works, thank you for your help in any case! @w1cx No, I record with Geforce Experience, OBS studio is only used for record my PC screen, or if I ever want to stream I don't know why it was applied in the nvidia parameters, now it's ET Edited February 18, 2020 by Young Fox Quote Link to comment Share on other sites More sharing options...
Administrators daredevil Posted February 19, 2020 Administrators Share Posted February 19, 2020 Check your last valid render and make sure your laptop if laptop, it is set to performance in power option. Many times ET wouldn't use dedicated GPU if available and will use CPU's GPU. Share your config. 1 Quote Link to comment Share on other sites More sharing options...
Young Fox Posted February 19, 2020 Author Share Posted February 19, 2020 (edited) Excuse me for my incompetence in the field, But I will try to answer, sometimes it will be with a question in return .. Therefore : 12 minutes ago, daredevil said: Check your last valid render and make sure your laptop if laptop That is to say? Is it in ET? What exactly should I do? My PC is a laptop yes, its name even starts with "LAPTOP -....." It's This one : Otherwise, I did not understand what I should do 😛 12 minutes ago, daredevil said: It is set to performance in power option. Many times ET wouldn't use dedicated GPU if available and will use CPU's GPU. How do you check this please? 12 minutes ago, daredevil said: Share your config. Okay, but what part of the config? System information or my settings? Thank you, Fox. Edited February 19, 2020 by Young Fox Quote Link to comment Share on other sites More sharing options...
Gladiator Posted February 19, 2020 Share Posted February 19, 2020 (edited) Enter Server write / writeconfig xxx. Cfg in console share here. Replace xxx with what ever u Name uwant Edited February 19, 2020 by Gladiator 1 Quote Link to comment Share on other sites More sharing options...
Young Fox Posted February 19, 2020 Author Share Posted February 19, 2020 (edited) My Cfg password : mycfgFA Normally it should be good Edited February 19, 2020 by Young Fox Quote Link to comment Share on other sites More sharing options...
Administrators daredevil Posted February 19, 2020 Administrators Share Posted February 19, 2020 1 hour ago, Young Fox said: It is set to performance in power option. Many times ET wouldn't use dedicated GPU if available and will use CPU's GPU. 1 hour ago, Young Fox said: How do you check this please? Now if i tell my ET to make use of GPU through nvidia drivers - After above settings - Just FYI - Their are people/players who use other people config and use ATI settings while they have Nvidia.. at least u are not doing that lol 😂 1 1 Quote Link to comment Share on other sites More sharing options...
Young Fox Posted February 19, 2020 Author Share Posted February 19, 2020 Thank you, I do all this and I post the result 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.