THE BEAST Posted December 26, 2019 Share Posted December 26, 2019 so here lately I dont know how it started but the last few weeks My fps in et has been crap ive rolled back my drivers from when it was working perfectly but i cannot get a stable fps any more my pc spec are. amd fx 4300 quad core processor 3.31 Ghz ddr3 8gb Graphics Card Radeon Rx 460 8gb Motherbored: asustek computer inc. m5a78l-m/usb3 Screen hz 75 My adverage team under load is 75 being the highest so on that behalf My average fps at the lowest 24 highest 80. when full server Now my Average not on a full server like 7vs7 90-112 being the lowest to highest Even @N!ghtmare Team vied me the other day trying to help. Ive deleted every path of et possible an reinstalled to try that then i even put a new ssd clear ssd with windows 10 installed an put et on it an still same fps problem so on that Im out of choices I cant record anymore which i honestly love doing but with this fps is ruining me an ticking me off to not even play et. my computer can handle gta5 farcry5 beamngdrive my summer car 60fps an over Ive tested all my hardware an all seems to be great. so if someone could pretty please help me an if you cant i guess im gonna have to same up an build an intel an nivida system because i dont think you an put intel from amd? I also seen amd has been contacted about this doubt they do anything since its such an old game https://community.amd.com/thread/198897 Quote Link to comment Share on other sites More sharing options...
RendeL Posted December 26, 2019 Share Posted December 26, 2019 Have you tried /set r_primitives 2 3 Quote Link to comment Share on other sites More sharing options...
captnconcrete Posted December 26, 2019 Share Posted December 26, 2019 can u screen shot ur gpu settings for et. can u post your cfg. i hate ati cards .. an am not a w10 buff. but i think i could help u. also post ur driver.. for your gpu. i have a asus board also i also run amd cpu and i can pull a pretty solid 125 with this little 8400gs in. just would like to add /r primitives too 2 doesnt always help. i have to switch mine to 0 1 Quote Link to comment Share on other sites More sharing options...
THE BEAST Posted December 26, 2019 Author Share Posted December 26, 2019 yes ive tried 0-2. 2 is the only one that will work so it stays a t 2. gpu: https://www.amd.com/en/support/kb/release-notes/rn-rad-win-19-12-3 cfg.cfg Quote Link to comment Share on other sites More sharing options...
captnconcrete Posted December 26, 2019 Share Posted December 26, 2019 at a quick glance u said u have 75 hz resfresh rate u have it set to 85 in cfg. u also have it set i too 144hz in diff spot.. i would like to see ur actual settings in your gpu for et .. where u can custom set it for each game.? i will go compare to my cfg. and ill maybe share mine with u .maybe .lol 1 Quote Link to comment Share on other sites More sharing options...
RendeL Posted December 26, 2019 Share Posted December 26, 2019 This might be the issue: seta r_lastValidRenderer "GeForce GTX 1060 3GB/PCIe/SSE2" This is because you have rolled back your driver and on Et it is "stuck" on old one. I had this issue way back, but cant remember how I fixed it. I'd try reinstall et, wipe everything off from et folders by using cc cleaner for example and check the registry with same program, as amd drivers leave stuff behind. 1 Quote Link to comment Share on other sites More sharing options...
THE BEAST Posted December 26, 2019 Author Share Posted December 26, 2019 No this isnt a config problem this is the one i just recently started using an give me a bit better of fps since i just reinstalled et i redownloaded the config an posted it here so it hasnt even been put back in my et yet Quote Link to comment Share on other sites More sharing options...
captnconcrete Posted December 26, 2019 Share Posted December 26, 2019 yes says u are using a 1060 u arnt are u. u can re set it ur self . u also have some weird old ass none working cvars in ur cfg. u dl it from someone else didnt u. like mirror it looks like.lol r_dipslayrefresh "85" r_displayRefresh "144" unsafe cl_125hz "1" u said ur using a Graphics Card Radeon Rx 460 8gb thats not what it saysi n ur cfg it says thisr_lastValidRenderer "GeForce GTX 1060 3GB/PCIe/SSE2 1 Quote Link to comment Share on other sites More sharing options...
captnconcrete Posted December 26, 2019 Share Posted December 26, 2019 29 minutes ago, THE BEAST said: No this isnt a config problem this is the one i just recently started using an give me a bit better of fps since i just reinstalled et i redownloaded the config an posted it here so it hasnt even been put back in my et yet if your getting fps loss on server and wanting help u must post cfg u where using when it happened and the gpu settings u have in the gpu driver. u cant post some random bs cfg that u havent used yet.?that makes no sense. et doesnt pull solid stable fps on stock install. Quote Link to comment Share on other sites More sharing options...
THE BEAST Posted December 26, 2019 Author Share Posted December 26, 2019 Some bs config?????? ive used it like i said it has givin me better fps. (but i have not put the config back in since i reinstalled et like i said) what i was using before was stock et with a few changes like no sky an atmosphere affects 1 Quote Link to comment Share on other sites More sharing options...
Xernicus Posted January 2, 2020 Share Posted January 2, 2020 (edited) Sounds like you've ruled out a software problem, albeit in an extreme manner. I'd ask what the most recent Windows Updates were, but now that you've installed a new drive.... anyways: First things first, have you tried dusting out your PC? it might sound silly, but seriously. Have you done it? 75 degrees C is too hot for FX processors. Your PC needs a good dusting, or you need to re-paste the CPU. PS: That config is full of crap. Half of the values aren't even being followed, and are marked as "unsafe". Why not follow the form here and either I or someone else can make one a little more streamlined? It's not a big deal to merge two configs. Edited January 2, 2020 by Xernicus 2 Quote Link to comment Share on other sites More sharing options...
Leader RedBaird Posted January 2, 2020 Leader Share Posted January 2, 2020 He might be able to save his profile and/or cfg and then let ET create a new one with default settings. Then see what last_validrenderer is...just for a clue. Quote Link to comment Share on other sites More sharing options...
THE BEAST Posted January 25, 2020 Author Share Posted January 25, 2020 i still haven't figured it out...... ive taken my pc completely out mother bored an taken everything apart cleaned re pasted with the diamond paste an its still not stable fps.... this processor should be able to do it but it doesnt every other game runs smooth just wish it would be fixed Quote Link to comment Share on other sites More sharing options...
Leader RedBaird Posted January 25, 2020 Leader Share Posted January 25, 2020 We have had various players and clan-members, including the Leadership, having WTF problems recently. You can take Xernicus's suggestion of 2 January, and/or you can move your configs out of the etmain and mod's profile folders and let ET install the Default one and see what happens...or have you done that already? Check for any Autoexec.cfg files that you might have in etmain or mod-folders. Sometimes these problems just seem to 'go away on their own', leaving cries of Frustration in their wake. I had a 'screen-darkening' problem late last year that I blamed in my mind on a just-previous Win10 update. I struggled with various settings in the different mods and the problem would go away and then pop up when the map changed for sometimes in the middle of a map! It finally quit happening, but now I am left with the various settings in the various mods that I now have to repair. Ya gotta 😃 after you are done 😭. 1 Quote Link to comment Share on other sites More sharing options...
THE BEAST Posted February 8, 2020 Author Share Posted February 8, 2020 im just lost :(. ive ask youngfox on youtube just now. so maybe he can help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.