Jump to content

[NQ1] Lag, Hit detection, MTR

10Tacle

By 10Tacle
in ET Support

 Share
Go to solution Solved by 10Tacle,

Recommended Posts

10Tacle Newbie

10Tacle

Posted
Posted

sup

 

lately I have a very bad connection to NQ1. My ping is very stable at 48 - 50 tho. Yet I don't get the 'straight' feeling, hitting something that moves seems impossible. Even hitting something that just sits there sometimes is.. well strange.

 

I have run a 100 and a 500 packet MTR, attached to this post. Speedtest shows a 20mb/s download as well as a 2mb/s upload, im connected with the cable to the router.

 

Operating System: Win 7 64 bit SP1
CPU: i5 3470 3.2 - 3.6 Ghz
RAM: 8GB GDDR5
Motherboard: ?
Hard drive (IDE, PATA, SATA, etc): SSD
Graphics card: Sapphire Radeon 7900 3072 MB
Graphics card driver version: Newest Crimson ones (15.11)
Wifi: non, cable
Your location (country): Switzerland
Router Name (If you use any): Centro Grande I think
Which anti virus and firewall you use: using Avast!

 

 

I've attached the autoexec and the normal lagometer I have too, perhaps you can detect something in it. Please help :):wub:

 

NQ1 100 packets.txt

NQ1 500 packets.txt

autoexec.cfg

post-16838-0-71943900-1449166362_thumb.jpg

Achilleus Newbie

Achilleus

Posted
Posted

Same here, ping OK, but short lags when running into others. 

Have noticed it for a few days now.

  • Like 1
D..X Grand Master

D..X

Posted
Posted

:o  where are all our highly trained tech monkeys? :D  

  • Like 2
Masa_1964 Rising Star

Masa_1964

Posted
Posted (edited)

Have you tested earlier radeon driver? New aps installation after change?

 

Masa_1964

 

Mtr:100

|------------------------------------------------------------------------------------------|
|                                      WinMTR statistics                                   |
|                       Host              -   %  | Sent | Recv | Best | Avrg | Wrst | Last |
|------------------------------------------------|------|------|------|------|------|------|
|                             192.168.0.1 -    1 |  100 |   99 |    0 |    0 |    0 |    0 |
|                               [deleted]    -    1 |  100 |   99 |    0 |   11 |   16 |   14 |
|                           62.78.110.158 -    1 |  100 |   99 |    0 |   11 |   47 |    9 |
|                            62.78.121.16 -    1 |  100 |   99 |    0 |   11 |   34 |   13 |
|                            62.78.107.16 -    1 |  100 |   99 |    0 |   23 |   31 |   20 |
|                            62.78.107.31 -    1 |  100 |   99 |    0 |   22 |   31 |   21 |
|                           192.121.80.18 -    1 |  100 |   99 |    0 |   22 |   28 |   21 |
|                            81.95.15.206 -    1 |  100 |   99 |    0 |   50 |   55 |   52 |
|                              81.95.15.6 -    1 |  100 |   99 |    0 |   47 |   57 |   49 |
|                         213.239.203.137 -    1 |  100 |   99 |    0 |   46 |   58 |   45 |
|                         213.239.245.222 -    1 |  100 |   99 |    0 |   48 |   60 |   48 |
|                          213.239.245.78 -    1 |  100 |   99 |    0 |   52 |  182 |   49 |
|                          213.133.125.19 -    1 |  100 |   99 |    0 |   51 |   65 |   54 |
|                           178.63.72.133 -    0 |  104 |  104 |   47 |   48 |   70 |   48 |
|________________________________________________|______|______|______|______|______|______|
   WinMTR v0.92 GPL V2 by Appnor MSP - Fully Managed Hosting & Cloud Provider

 

And 500:

|------------------------------------------------------------------------------------------|
|                                      WinMTR statistics                                   |
|                       Host              -   %  | Sent | Recv | Best | Avrg | Wrst | Last |
|------------------------------------------------|------|------|------|------|------|------|
|                             192.168.0.1 -    0 |  501 |  501 |    0 |    0 |    0 |    0 |
|                             [deleted]      -    0 |  501 |  501 |    8 |   11 |   33 |   12 |
|                           62.78.110.158 -    0 |  501 |  501 |    7 |   12 |   50 |   14 |
|                            62.78.121.16 -    0 |  501 |  501 |    6 |   11 |   41 |   11 |
|                            62.78.107.16 -    0 |  501 |  501 |   19 |   22 |   36 |   23 |
|                            62.78.107.31 -    0 |  501 |  501 |   19 |   22 |   32 |   23 |
|                           192.121.80.18 -    0 |  501 |  501 |   19 |   22 |   33 |   22 |
|                            81.95.15.206 -    0 |  501 |  501 |   46 |   49 |   84 |   50 |
|                              81.95.15.6 -    0 |  501 |  501 |   44 |   47 |   63 |   52 |
|                         213.239.203.137 -    0 |  501 |  501 |   43 |   47 |   64 |   52 |
|                         213.239.245.222 -    0 |  501 |  501 |   43 |   49 |   63 |   55 |
|                          213.239.245.78 -    0 |  501 |  501 |   46 |   50 |  186 |   57 |
|                          213.133.125.19 -    0 |  501 |  501 |   47 |   49 |   62 |   50 |
|                           178.63.72.133 -    0 |  501 |  501 |   43 |   49 |   60 |   52 |
|________________________________________________|______|______|______|______|______|______|
   WinMTR v0.92 GPL V2 by Appnor MSP - Fully Managed Hosting & Cloud Provider

Edited by RedBaird
[deleted] from a public forum
  • Like 1
10Tacle Newbie

10Tacle

Posted
  • Author
Posted

:o  where are all our highly trained tech monkeys? :D  

 

I will donate a banana phone to the monkeys :D

 

Have you tested earlier radeon driver? New aps installation after change?

 

yes. Another game had problems first with crimson driver, so I put on the previous one (non-beta). I resolved the issue with the other game and re-tried crimson, no difference in ET still.

 

How can I describe it, it feels like my movements and shots are all lightly drunk, not reliable. Any other suggestions I could try? 

  • Like 1
  • Leader
RedBaird Grand Master

RedBaird

Posted
  • Leader
Posted (edited)

Did you try the Crimson hotfix?  http://fearless-assassins.com/topic/76439-amd-to-release-hotfix-for-low-fan-speeds/  I don't know how an overheating graphics card would behave.

 

 

I searched for symptoms of an overheating GPU and it seems that play would be ok for a few minutes and then as the GPU got hotter, the thermal-protection module in it would slow the card down to keep it from damaging itself.

 

The "RealTemp" program was mentioned as a way to monitor system temps.

Edited by RedBaird
search results
  • Like 1
10Tacle Newbie

10Tacle

Posted
  • Author
Posted

Did you try the Crimson hotfix?  http://fearless-assassins.com/topic/76439-amd-to-release-hotfix-for-low-fan-speeds/  I don't know how an overheating graphics card would behave.

 

Ohai Red!

 

Not that I'm aware of, no. I will install that fix. I monitor fan speeds / temperature and my case has additional fans. When ever a demanding game is up, the fans rotate and I can hear it ^^ 

ET is not that demanding, but perhaps the fix also works for my problem.

10Tacle Newbie

10Tacle

Posted
  • Author
Posted

you play at 60fps? or you have vsync on?

 

I do get 60 fps, yet no vsync on in my crimson settings. It's all in my autoexec regarding ET settings

  • Clan Friend
SunLight Newbie

SunLight

Posted
  • Clan Friend
Posted

I do get 60 fps, yet no vsync on in my crimson settings. It's all in my autoexec regarding ET settings

r_swapInterval should be 0

 

I asked you because vsync gives mouse lag and other problems, so when I saw that screenshot I wondered if that was your problem

  • Like 1
10Tacle Newbie

10Tacle

Posted
  • Author
Posted

r_swapInterval should be 0

 

I asked you because vsync gives mouse lag and other problems, so when I saw that screenshot I wondered if that was your problem

 

in the attached autoexec (which gets executed every time I start ET) r_swapinterval is 0 indeed. I will doublecheck that there is no vsync what so ever in any setting from AMD side, thx mate!

 

Anything special about the screenshot? I just was too lazy to crop the lagometer, when I play it's two neat lines with very few flat spikes sometimes.

Raskin Newbie

Raskin

Posted
Posted

Hey..just a thought..my nvidia geforce card reset itself to default settings wolf et was not under list of games to change 3d settings...vsync on multi display on best quality... I checked because was getting same symptoms you had .so had to change all those back to performance settings..

  • Like 1
10Tacle Newbie

10Tacle

Posted
  • Author
Posted

Hey..just a thought..my nvidia geforce card reset itself to default settings wolf et was not under list of games to change 3d settings...vsync on multi display on best quality... I checked because was getting same symptoms you had .so had to change all those back to performance settings..

 

Can give this a shot, yes, I already need to install a fix (which will likely mess with my previous settings). thx for the hint mate!

10Tacle Newbie

10Tacle

Posted
  • Author
Posted

Can give this a shot, yes, I already need to install a fix (which will likely mess with my previous settings). thx for the hint mate!

 

Both 'waiting on vertical sync' as well as 'frame rate target control' are not active (global games and enemy territory specific)

  • Solution
10Tacle Newbie

10Tacle

Posted
  • Author
  • Solution
Posted

Solved this issue.

 

The hotfix worked wonders, I could access a menu called display settings. Scaling was always set to 'fullsize', instead I switched it to 'keep ratios' and swoosh, all back to normal.

 

thx for all the suggestions <3

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

About Us

We are glad you decided to stop by our website and servers. At Fearless Assassins Gaming Community (=F|A=) we strive to bring you the best gaming experience possible. With helpful admins, custom maps and good server regulars your gaming experience should be grand! We love to have fun by playing online games especially W:ET, Call of Duty Series, Counter Strike: Series, Minecraft, Insurgency, DOI, Sandstorm, RUST, Team Fortress Series & Battlefield Series and if you like to do same then join us! Here, you can make worldwide friends while enjoying the game. Anyone from any race and country speaking any language can join our Discord and gaming servers. We have clan members from US, Canada, Europe, Sri Lanka, India, Japan, Australia, Brazil, UK, Austria, Poland, Finland, Turkey, Russia, Germany and many other countries. It doesn't matter how much good you are in the game or how much good English you speak. We believe in making new friends from all over the world. If you want to have fun and want to make new friends join up our gaming servers and our VoIP servers any day and at any time. At =F|A= we are all players first and then admins when someone needs our help or support on server.

Player Gaming Stats for =F|A= Servers.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept