Graphics pixelate on new pc.

[ElEl]

Could you share pictures or a video of what it looks like when you launch the game? That would help a ton with troubleshooting.

[Old Timer]

It's the AMD Radeon RX5600 and there is an Intel UHD 750 card. I updated both drivers and now the game won't start at all. "Could not load openGL subsystem." 

[Snuffs99]

33 minutes ago, Old Timer said:

It's the AMD Radeon RX5600 and there is an Intel UHD 750 card. I updated both drivers and now the game won't start at all. "Could not load openGL subsystem." 

 

 

So ignore the intel card as that is probably inbuilt for if you have a CPU with APU.

 

You can either add the following to the etconfig.cfg file in your etmain folder and force ET to start 

 

+set r_allowSoftwareGL 1 

 

OR

 

You can add the screen resolution and type to a shortcut which will override the etconfig.cfg settings 

 

For example 

+r_mode -1 +r_customwidth 1920+r_customheight 1080+cg_fov 110 +set com_hunkmegs 768 +vid_restart

 

OR

 

You can delete the etconfig.cfg file(s) (should only need ot remove the etmain one) and when you then start ET it will create a new default etconfig file and default back to that so would be like a fresh install.

 

OR

 

You can install ET legacy and see if that works

 

OR

 

You can uninstall ET completely and reinstall a fresh copy.

 

 

[captnconcrete]

mostlikely the intel integrated graphics overriding ur caRD.

 

u have to go into your bios and set to use your graphics card ..not your onboard graphics.

 

do u have  your monitor plugged in to motherboard or your graphics card? most are plug an play now . maybe this is whats going on.

[Old Timer]

I have dual monitors. There are two inputs, one is HDMI and the other is Display port which i use an adapter for the HDMI cable. I did what Snuffs99 suggested and installed ET Legacy. The game loads without pixelation but now it moves in super slow motion. Lol. 

[Snuffs99]

PM'ed you the following but will put it here for future needs.

 

 

The super slowness Is probably caused by certain settings like FOV and resolution. Legacy probably set your FOV to the default value of 90 in which case upping the FOV will make the game play "seem" faster.

 

As legacy works from the looks of it its a config issue on your 2.60b install, easy fix to that is to delete all etconfig.cfg files from your 2.60b install along with any autoexec.cfg files you have (if you want to keep the autoconfig then save it to desktop till your back up and running) , so remove them from etmain and all mod folders. Once they are deleted when you start ET it will/should create a new etconfig.cfg file which should fix your GL errors.

[Buckwild]

Make sure video is set to card, Not onboard:

Press F2 after starting for Bios. Go to System setup, Video controller...Choose videocard.

https://dl.dell.com/topicspdf/xps-8940-desktop_service-manual_en-us.pdf

Win10 video settings:https://support.cyberpowerpc.com/hc/en-us/articles/360014499434-Change-Video-Settings-in-Windows-10

I use highest resolution, You can see better...

Good Luck!

[captnconcrete]

this is why i dont use etlegacy it moves slower to me then regular et.seems the hit registry is not right.lol

 

unplug your sec monitor.  get it to work with one only plugged in to your graphics card. u have one monitor plugged into your  onboard gpu and one to your gpu card?

 

or u have wrong one set to be 1st. if its like mine you wont get same res out of sec monitor.