Need a little help

[rambozo37]

I've played with the same pc, same cfg for almost 10 years. It was mostly built while playing ETpub at the time. Now that my pc burned and build a new one I need help for my cfg. My acc dropped drastically and seems like I just cant follow what's going on. If I aim at someones head I miss lol! Its even worst then the first time I played this game and was a total noob. I tried a bunch of things but I'm out of ideas and started to think I should start fresh. Any tips for this kind of system?

 

• CPU: i7 7700K
• RAM: 16g ram ddr4
• Graphic Card: MSI Geforce gtx 1050ti
• Monitor: 32" Samsung 5ms
• Internet connexion and speed: cable
• Game graphics: ugly
• What resolution you play with: 1600x900
• What Sensitivity: 4.00
• What Crosshair: 5 (red)
• What FOV you want: 120
• Windows 10

[captnconcrete]

there are alot of video settings u could mess with.

 

so u are playing with a stock cfg.

 

ill dig up some of mine.k assuming its jaymod u play.

 

cl_yawspeed "0"
cl_pitchspeed "0"

sensitivity "2.100000

cl_mouseAccel "0"
m_pitch "0.015010"

m_yaw "0.016"

cg_drawGun "0"
cg_crosshairSize "32"
rate "34000"
snaps "20"
r_picmip "1"
r_roundImagesDown "1"
r_rmse "0.0"
r_detailtextures "1"
r_overBrightBits "1"
r_customwidth "1440"
r_customheight "900"

r_subdivisions "999"

 r_flares "0"
 r_fastsky "1"
r_drawSun "1"
r_gamma "1.937500"
 r_finish "0"
r_dynamiclight "0"

r_primitives "2"
cg_shadows "0"
cg_brassTime "0"
cg_showblood "0"
cg_bloodFlash "0"
cg_crosshairPulse "0"
cg_crosshairColor "red"
cg_coronafardist "0"
r_clampToEdge "1" 

r_texturebits "32" 

r_colorbits "32

r_stencilbits "0"

r_depthbits "24" 

r_mode "-1" 

cg_bobpitch "0"

cg_bobroll "0"
cg_bobup "0"
cg_bobyaw "0"
cg_blinktime "0"
cg_bloodDamageBlend "0"
cg_bloodtime "0"

cg_muzzleFlash "0"
cg_runroll "0"
cg_runpitch "0"
cg_tracers "0"
cg_gun_fovscale "0"
cg_optimizePrediction "0"

cg_watermarkOpacity "0.0"

 cg_fastSolids "1"
cg_atmosphericEffects "0"

cg_coronas "0"
cg_fov "107"
com_soundMegs "64"
com_hunkMegs "156"
com_zoneMegs "128"

 

sound hunk and zone must be put in your load parimmiter or wont change .

 

right click et icon click properties . .  et.exe" + set com_hunkMegs "156" + set com_zoneMegs "128" + set com_soundMegs "64"

[Anton Chigurh]

Your hardware is 10 years better then mine. 

So unless its broken you should get some nice results regarding FPS and Graphics.

Whats your ping?

How much FPS you get?

23 minutes ago, rambozo37 said:

 I tried a bunch of things but I'm out of ideas and started to think I should start fresh.

What did you try?

 

Any maybe you can post your config here, so experts can have a look.

 

Did you Always play with sensitivity 4.0?

[rambozo37]

Well my pc burned (fire) so I lost my good old config. I made a new one but cant remember everything i used to have so this is what i have so far

 

Ping around 50

Fps around 60

Yes sensivity 3.87 or 4.0 is what i have always used

Yes i play jaymod

 

1 hour ago, captnconcrete said:

sound hunk and zone must be put in your load parimmiter or wont change .

right click et icon click properties . .  et.exe" + set com_hunkMegs "156" + set com_zoneMegs "128" + set com_soundMegs "64"

Wow totally forgot about that thx!

 

rambozo.cfg

[Mufasa]

You have v-sync enabled in your config. It caps your FPS so they never exceed the refresh rate of your monitor. I'm guessing you have a 60hz monitor and that's why you have 60 FPS. To disable that, change r_swapInterval to 0 in your config (and exec it again and vid_restart).

[captnconcrete]

16 minutes ago, TurtleMan said:

You have v-sync enabled in your config. It caps your FPS so they never exceed the refresh rate of your monitor. I'm guessing you have a 60hz monitor and that's why you have 60 FPS. To disable that, change r_swapInterval to 0 in your config (and exec it again and vid_restart).

i always forget this one ..lol good spot bro!you have max fps 333 lmafo . set to 150. is best .m pitch is up down of cross hairs  lower this ..easier to hold a steady  aim. mouse  sensitivity ..  lets talk on this .. 5.0 really wow. never seen a good shot over 2.5  but depends on your  mouse i guess. but you should teach your self   . at lower then 5.00 

Edited April 29, 2018 by captnconcrete
cuz i can

[rambozo37]

omg I have maxfps 333... haven't seen this. I usually use 125 but I'll go with your suggestion. In my cfg mouse sensivity is 5.00 but I actually set it to 3.87 or 4.0 with the settings of my Logitech G5 its always been perfect.

 

I never really played with mpitch. I'll give it a shot

 

I didn't think of v-sync either

 

I am starting to realize I made quite a few mistakes in there

 

thx allot guys

[rambozo37]

thx again that made the difference... a huge difference!

[Barn!e]

Also add +set com_ignorecrash 1 to the startup line of ET as mentioned and repeated below. it makes sure the game ignores the word unsafe that gets spammed all over etconfig.cfg..

 

et.exe"; + set com_hunkMegs "156"; + set com_zoneMegs "128"; + set com_soundMegs "64"