Jump to content

Help config


YourDeath
 Share

Recommended Posts

hi, it's my config and i need help because i always have 40/50 fps... Can u help me :) (you can help me for all my cfg :) )

 

 

// _________________________
// _______________________
// [ Low Graphic Settings ]
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
// ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
// May increase performance, but has very poor graphic quality.
// Cfg based on my graphic cfg.
// Designed mostly for NoQuarter.
// Cfg created entirely by -=PDP=-Scarhand, do not steal.
// Written in notepad with size 14 font, Times New Roman.
exec "preset_fast_ui.cfg"
// You can use fastest if you want instead of fast.
//////////////////////////////
////// Rendering //////
////////////////////////////
// r_colorbits "16"
r_compressModels "1"
r_detailTextures "0"
r_dlightBacks "0"
r_drawSun "0"
r_dynamiclight "0"
r_dynamictextures "0"
r_ext_compressed_textures "1"
r_ext_texture_filter_anisotropic "0"
r_ext_multitexture "1"
r_facePlaneCull "1"
r_fastsky "1"
r_flares "0"
r_highQualityVideo "0"
r_ignoreFastPath "0"
r_inGameVideo "0"
r_lodCurveError "1"
// Above: Turn this higher up to remove the effects of messed up roads and train tracks. Default 200?
r_lodbias "2"
r_picmip "3"
r_rmse "0"
// above: Higher is worse quality. Too high and you can't see text or HUD, and it makes your crosshair blurry.
r_roundImagesDown "1"
r_simpleMipMaps "0"
// Above: turn this on if the extreme texture quality is bothering you.
r_subdivisions "999"
// r_texturebits "16"
r_textureMode "GL_LINEAR_MIPMAP_NEAREST"
// above: GL_NEAREST is even worse quality. Havent tried it.
/////////////////////////////////
////// Client Game //////
////////////////////////////////
cg_atmosphericEffects "0"
cg_coronas "0"
cg_cursorhints "4"
cg_bloodDamageBlend "0"
cg_bloodFlash "0"
cg_bloodTime "0"
cg_brassTime "0"
cg_drawAuraIcons "0"
cg_drawCompass "1"
cg_drawMuzzleFlash "0"
cg_drawTracers "0"
cg_fastSolids "1"
cg_gibs "0"
cg_impactParticles "0"
cg_marks "0"
cg_marktime "0"
cg_muzzleFlash "0"
cg_optimizePrediction "1"
cg_shadows "0"
cg_showBlood "0"
cg_simpleItems "1"
cg_smokeParticles "0"
cg_tracers "0"
cg_trailParticles "0"
cg_wolfParticles "0"
//////////////////////////
////// Sounds //////
/////////////////////////
s_doppler "0"
s_khz "22"
s_mixahead "0.14"
//////////////////////////
////// Plus /////////////
/////////////////////////
rate 25000
cg_fov 120
sensitivity 0.30
cl_maxpackets 100
com_maxfps 100
seta r_mode "-1"
seta r_customheight "1080"
seta r_customwidth "1920"
seta r_fullscreen "1"
seta r_primitives "2"
name "^7=^0F^1|^0A^7=^1Your^0Death"
cg_gun_fovscale 0

// generated by ET, do not modify
unbindall
bind TAB "+scores"
bind ESCAPE "togglemenu"
bind , "mapzoomout"
bind - "zoomout"
bind . "mapzoomin"
bind 0 "weaponbank 10"
bind 1 "weaponbank 1"
bind 2 "weaponbank 2"
bind 3 "weaponbank 3"
bind 4 "weaponbank 4"
bind 5 "weaponbank 5"
bind 6 "weaponbank 6"
bind 7 "weaponbank 7"
bind 8 "weaponbank 8"
bind 9 "weaponbank 9"
bind = "zoomin"
bind ` "toggleconsole"
bind a "+moveleft"
bind b "+zoom"
bind MOUSE2 "+movedown"
bind d "+moveright"
bind e "+leanright"
bind f "+activate"
bind g "+mapexpand"
bind l "openlimbomenu"
bind m "mvactivate"
bind q "+leanleft"
bind r "+reload"
bind s "+back"
bind t "messagemode"
bind u "messagemode3"
bind v "mp_quickmessage"
bind w "+forward"
bind x "+prone"
bind y "messagemode2"
bind z "mp_fireteammsg"
bind ~ "toggleconsole"
bind CAPSLOCK "+speed"
bind ALT "+stats"
bind p "+topshots"
bind SHIFT "+sprint"
bind F1 "vote yes"
bind F2 "vote no"
bind F3 "ready"
bind F11 "autoscreenshot"
bind F12 "autorecord"
bind KP_LEFTARROW "selectbuddy 3"
bind KP_5 "selectbuddy 4"
bind KP_RIGHTARROW "selectbuddy 5"
bind KP_END "selectbuddy 0"
bind KP_DOWNARROW "selectbuddy 1"
bind KP_PGDN "selectbuddy 2"
bind KP_ENTER "mp_fireteamadmin"
bind KP_INS "selectbuddy -2"
bind KP_DEL "selectbuddy -1"
bind MOUSE1 "+vstr shootOn shootOff"
set shootOn "+attack; +sprint"
set shootOff "-attack; -sprint"
bind MOUSE5 "weapalt"
bind MWHEELDOWN "weapprev"
bind MWHEELUP "weapnext"
bind j "vsay GreatShot Great Shot"
bind 0 "vstr fovek"
set fov1 "sensitivity 0.30 ; com_maxfps 100 ; m_pitch 0.01701 ; set fovek vstr fov2 ; rate 34000 ; echo ^4Medic"
set fov2 "sensitivity 1.90 ; com_maxfps 100 ; m_pitch 0.01701 ; set fovek vstr fov1 ; rate 34000 ; echo ^6Covert"
set fovek "vstr fov1"
bind SPACE "+moveup"
bind f8 say "^7Hello ^1all ^7, ^0Good ^1Game ^0:^7)"
//180 Degree Turn Script
bind mouse4 "set com_maxfps 40; set cl_yawspeed 13900; +left; wait 2; -left; set cl_yawspeed 140; com_maxfps 100;"

seta com_soundMegs "64"
seta com_crashed "0"
seta com_hunkMegs "328"
seta com_zoneMegs "64"
seta pmove_fixed "0"
seta r_ext_compressed_textures "1"
seta snaps "20"
 
vid_restart

 

Link to comment
Share on other sites

set your rate to 34000

set your FPS to whatever you can run steady... if your running 40 - 50  set your maxfps for right around that

r_lodCurveError set higher ??not sure if this will help much

what is your display refresh set to on your monitor?? set your display refresh in game to that of monitor... i can send you a copy of my  config if you'd like

 

also free up space on your computer, shut down programs you dont need... what are you running for a computer?

Link to comment
Share on other sites

set your rate to 34000

set your FPS to whatever you can run steady... if your running 40 - 50  set your maxfps for right around that

r_lodCurveError set higher ??not sure if this will help much

what is your display refresh set to on your monitor?? set your display refresh in game to that of monitor... i can send you a copy of my  config if you'd like

 

also free up space on your computer, shut down programs you dont need... what are you running for a computer?

 

 

shouldnt be every "newer" pc able to run et smooth?

i think its really weird he only got 40-50 fps for this game.

  • Like 1
Link to comment
Share on other sites

hi, it's my config and i need help because i always have 40/50 fps... Can u help me :) (you can help me for all my cfg :) )

 

r_lodbias "2"
seta r_customheight "1080"

seta r_customwidth "1920"

seta r_primitives "2"

r_lodbias: to 3 (custom)

r_customheight & r_customewidth: lower the resolution you use. 1280x1024 max in your case.

r_primitives: what is the brand\model of your graphic card?

  • Like 1
Link to comment
Share on other sites

With my old computer I ran about 70 FPS fairly steady and it was pretty old and out of date.. still had the ribbon connectors from motherboard to hdd, only had 4GB RAM,  2.5 GHZ processor... So you must be working with little to nothing YOURDEATH if your running that low.   The one change that I noticed the biggest difference for me was when I got a new monitor w/ 144hz, went from 60hz to 144hz and i kid you not my accuracy went up 8% in game.

Link to comment
Share on other sites

r_lodbias: to 3 (custom)

r_customheight & r_customewidth: lower the resolution you use. 1280x1024 max in your case.

r_primitives: what is the brand\model of your graphic card?

I agree with this.  The game is quite old and relies heavily on old school CPUs.  But... any PC that was made within the past 10 years or so should run the game fine.  Try lower resolution.

and cap your fps to something stable like 43.  Stable FPS is the king in ET.

  • Like 1
Link to comment
Share on other sites

set your rate to 34000

set your FPS to whatever you can run steady... if your running 40 - 50  set your maxfps for right around that

r_lodCurveError set higher ??not sure if this will help much

what is your display refresh set to on your monitor?? set your display refresh in game to that of monitor... i can send you a copy of my  config if you'd like

 

also free up space on your computer, shut down programs you dont need... what are you running for a computer?

 

Ye , i can try your cfg :) and my computer is a : hp pavillion g7...

And i only run ET xD

 

 

I agree with this.  The game is quite old and relies heavily on old school CPUs.  But... any PC that was made within the past 10 years or so should run the game fine.  Try lower resolution.

and cap your fps to something stable like 43.  Stable FPS is the king in ET.

 

Yeah i know stable fps is the best but i don't can :) i have 20 fps and after 2 seconds, i have 50...

 

here you can see my config on my computer: http://www.userbenchmark.com/UserRun/1901221

Link to comment
Share on other sites

hp pavillion g7

This gives me some insight as to your issues. My friend has one of those...

Unfortunately, it is notorious for overheating, and I am wondering my friend's issue isn't what you are experiencing.

Maybe you could use the program CoreTemp: http://www.alcpu.com/CoreTemp/
to monitor the temperature of your CPU while you have nothing open (ie idle), and while you are playing ET.

Please post the results.

Link to comment
Share on other sites

 

Very high background CPU (92%). High background CPU reduces benchmark accuracy. Find active processes with windows task manager

 

 

wtf have u opening?? 92% cpu   (according his benchmark: http://www.userbenchmark.com/UserRun/1901221)

 

anyway results saying a lot.

 

ram doesnt cost much. i paid 60EUR for 16GB

graphic card dunno

ssd is always good investion, my mac starting now in 5 seconds, everything else becomes faster too

 

a side note: do u need to install windows 10? doesnt it need much ram and memory? win10 needs afaik 1-2GB ram, u have 4 at all.

dunno if ur pc isnt that good or maybe an older os could be better.

Link to comment
Share on other sites

wtf have u opening?? 92% cpu

Could you edit your post to use the "quote" function or provide a link to the post? People can't search on the forums based on a sentence without a topic. :)

 

I have found that the minimum amount of RAM that is comfortable to run Win10 is 4GB. Anything less will not only to just be able to utilize "single-channel" speeds, but will result in virtual-memory swapping, especially regarding web/internet applications-- even if not all of the physical RAM is allocated. (there seems to be some new priorities to the Win. Task Scheduler)

 

Windows 8/8.1 was slimmed down because of the plan of the WinRT devices, but there can be UI/UX problems for some, and the above license issue applies.

 

An SSD would not help his problem, as far as his symptoms go. But it is good advice for anyone who wants to add performance to an already stable machine. So it is a nice recommendation :D

 

Regarding an 'older' OS... I actually don't know about that mate. Windows 7 could fit alright on 2gb, and *very tight* on 1gb (I did that after RAM failure)... once again though, newer internet browsers, plugins, and scripts are usually 'bloated' and take up enormous amts of RAM. But if he only has a Win10 license (and I'll make a reply on how to check)... it would cost him around $150 to downgrade, which isn't a good solution, in my opinion.

a side note: do u need to install windows 10? doesnt it need much ram and memory? win10 needs afaik 1-2GB ram, u have 4 at all.

dunno if ur pc isnt that good or maybe an older os could be better.

I take care of some machines that run XP-Vista... Vista runs OK, but it's task scheduler is shit, and it has memory consumption issues, mainly due to poor drivers...

Windows XP is simply unusable if you plan on using the internet... or any modern hardware... or any new application. I'm sad and sorry to say that. Especially regarding maintenance and troubleshooting... it is MUCH easier on any newer version of Windows; because WINNT40 through XP had an anemic amount of logs (and USELESS logfiles at that!!).

 

A rant below, plus advice against going the WinXP route:

 

 

I stuck with XP until 7 on my personal machine. And it was hard then... WinXP was starting to feel, well... laggy. So I decided to upgrade to Win7, and it ran fine on my XP-era HW. At work... the most important machine (besides the servers) STILL runs WinXP, and IT IS A PAIN IN THE A$$! I spend more time and money because of that OS, than on any of the other machines combined! I am going to bypass my boss and go to the president soon to demand an upgrade, because it is a waste of money.

 

Link to comment
Share on other sites

Could you edit your post to use the "quote" function or provide a link to the post? People can't search on the forums based on a sentence without a topic. :)

 

http://www.userbenchmark.com/UserRun/1901221

 

his benchmark he posted ;) editted it!

 

i noticed that chrome for example needs much more ram than other internet browsers. i've usually close all unneeded task before running et.

im not a windows user i just thought a downgrade would help but sounds other issues could come up then.

 

so if u say win10 needs 4GB and he has only 4Gb in total for ram, he should get some ram eh? could help here.

regarding ssd was just an advice as i looked up his benchmark. =)

Link to comment
Share on other sites

Ye , i can try your cfg :) and my computer is a : hp pavillion g7...

And i only run ET xD

 

 

 

Yeah i know stable fps is the best but i don't can :) i have 20 fps and after 2 seconds, i have 50...

 

here you can see my config on my computer: http://www.userbenchmark.com/UserRun/1901221

 

wow TREE TRUNK..  your in serious need of an upgrade my friend

 

heres my benchmark, AND I had ET running in the background, minimized of course but still....

 

http://www.userbenchmark.com/UserRun/1902499

 

My config wont help you at all, not much any config will do to help with what your running ..  sorry bud

Link to comment
Share on other sites

Ah ok... --' thanks you mate

 

 

 

There are still things you can do to improve your game, but its hard to polish a turd  :D if you get what im saying, do what everyone posted above it will help, and maybe look into upgrading your computer sometime!! Good Luck!

 

 

VETTER

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.