Jump to content

Recommended Posts

Posted

Hello guys, my internet is overall average, i mean working just fine, but on beginners 2 i always have some issues about ping, unlike on silent1 for example.
I have been using these :

 

/set rate 25000

/set snaps 20

/set cl_maxpackets 100

/set cl_timenudge -10

They do help most of times but i still lag sometimes or have high ping on beg2,some ideas to fix it?

  • Like 2
Posted

Maybe start to set your numbers on the servers default.

Beginners 2 uses /rate 45000 instead of 25000

try snaps to /snaps 40

/cl_maxpackets 125

If you use the same personal cfg for all servers.maybe you need to adjust some of them for beginners2 because of the server location? Maybe this doesnt make any difference but heee maybe give it a try.

And im sure there are people here that know a lot more then me about this, and can give you better advice,but this is all i can think off.So good luck with it :)

 

 

  • Like 3
  • Thanks 1
Posted
9 hours ago, Tobi said:

Will try that mate, thanks. 

are you using etlegacy client or 2.60b?  and b2 is in france.

  • Like 2
  • Leader
Posted
11 hours ago, Tobi said:

issues about ping, unlike on silent1

 

Using a VPN can reduce your throughput, depending on the provider and the packet path.

 

When I use a VPN for non-gaming, my throughput is reduced to 30 down and 30 up.  That might be less than what your ISP is set for.

 

You can use the winMtr program to examine your path to check for any 'problem nodes'.

 

ADDED:  Jus ttested my VPN down/up vs. my "naked ISP" speeds.

 

VPN     Download Mbps      39       Upload Mbps    37

ISP       Download Mbps    408       Upload Mbps    41

 

The distance from Serbia to the FR/DE border is not large, but you have to consider the distance from your ISP to the VPN server, too.

 

I made that mistake once when I tried to help a Beginners#2 admin with a problem for High Ping players.  I decided that a ping from Chile would be high enough, but when I connected to B2/Silent#2, it was MUCH LARGER than I had expected.  THEN I realized that I had forgotten about the distance from my West Coast, USA location to Santiago, Chile was some 9,000 KM and that I had to add that to my calculations, too.  😄 

 

If you download the winMtr program from FA Files Downloads and run it, you might find a 'node' that is higher ping than expected.  There have been reports of 'problem nodes' within Europe that cause higher pings than expected with Beginners#2 and #1.

 

 

 

  • Like 1
Posted
1 hour ago, captnconcrete said:

are you using etlegacy client or 2.60b?  and b2 is in france.

I use etlegacy latest update version. 

  • Like 1
Posted
In Enemy Territory, ping is mainly determined by the physical distance to the server and your ISP's routing to that server, not your internet speed.

The game requires very little bandwith.

About 0.5 Mbps in each direction provides plenty of headroom.

Even a 500 Mbps connection won't reduce ping if the server is far away or your ISP uses inefficient routing. Low latency and stable routing matter much more than bandwidth.

 
  • Like 1
  • 100 2
  • Leader
Posted
40 minutes ago, Sputnik said:

how bad can your ping be?

 

mine is normally like 230 but I am 13250km km from  the server 

 

I was on the server with him yesterday and saw his "low for me" ping double a few times.  While spectating him, I could see his lagomrter get a large green block each time.

 

His normal ping seemed to be about 1/4th of the ping that I get to the FA servers in the USA, from across the west coast to the east coast, about 4,000 km for me.

 

FA Founder Daredevil has said many times that it is more important to have a steady ping than it is to have a low ping.  I have seen many players connected to FA Jay#1 with "high pings", but very steady lagometers, who are also very good shots. 

 

When @Tobi rejoined later, I told him how to start up his lagometer with "/cg_lagometer 1" in the console.  He will be seeing a graphical reason for that "WTF?" feeling when one gets ping-spikes.  His blue line (network) was steady, and I told him that "red lines are B A D"!  People using wireless connections often have "hairy" or "saw-tooth" green lines, which they might or might not 'feel'.  😄  You will definitely feel any "green blocks", even the smaller-in-time ones. :( 

 

 

 

 

 

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.