Lenovo Posted March 14, 2017 Share Posted March 14, 2017 Would indeed create a LAN server jaymod, I have 4 pc, I read the guide but do not understand much, you can have the same cfg of this server? Quote Link to comment Share on other sites More sharing options...
Shana Posted March 14, 2017 Share Posted March 14, 2017 (edited) The most similar config you'd have to write yourself, because FA server configs are not available for everyone, sorry. You could try /serverstatus and see which cvars are set on server(onle some of them) Here is documentation for jaymod, everything you need actually to configure server and client https://goo.gl/jGHLi2 With default jaymod.cfg you can run your lan server without problems and for personal taste use server cvars from documentation. If you don't know how to write configs I can do that for you but on Friday Edit: Fixed documentation link. Edited March 14, 2017 by Shana 1 Quote Link to comment Share on other sites More sharing options...
Lenovo Posted March 14, 2017 Author Share Posted March 14, 2017 The most similar config you'd have to write yourself, because FA server configs are not available for everyone, sorry. You could try /serverstatus and see which cvars are set on server(onle some of them) Here is documentation for jaymod, everything you need actually to configure server and client https://jaymod.clanfu.org/lib/docs/jaymod-1.4.pdf With default jaymod.cfg you can run your lan server without problems and for personal taste use server cvars from documentation. If you don't know how to write configs I can do that for you but on Friday 404 Not Found 1 Quote Link to comment Share on other sites More sharing options...
Ann!b@l Posted March 14, 2017 Share Posted March 14, 2017 (edited) 404 Not Found https://jaymod.clanfu.org/ or https://jaymod.clanfu.org/lib/docs/jaymod-2.0.pdf (this is not the v2.2 doc but no real difference) Edited March 14, 2017 by Ann!b@l 1 Quote Link to comment Share on other sites More sharing options...
Shana Posted March 14, 2017 Share Posted March 14, 2017 https://jaymod.clanfu.org/ Fixed link with edit earlier. Didn't want to make new post just for link 1 Quote Link to comment Share on other sites More sharing options...
Lenovo Posted March 14, 2017 Author Share Posted March 14, 2017 i start the dedicated server with jaymod + omnibot but have this error bot addbot 1 1 test Omni-bot not loaded Quote Link to comment Share on other sites More sharing options...
DoubleDragon Posted March 14, 2017 Share Posted March 14, 2017 It would be easier to forward you to a post already on this site. Using the search bar on the top found this page here explains in detail how to do it. To save time in reality lol https://fearless-assassins.com/tutorials/article/125-how-to-make-a-jaymod-server/ The complete list of cvars for jaymod 2.1.7 most are all about the same. Start at chapter 5 where it says config in the yellowish boxes down that is a typical server.cfg pages 27-33 http://wolfet.pl/downloads/jaymod.pdf Hope that helps have good day Quote Link to comment Share on other sites More sharing options...
Lenovo Posted March 14, 2017 Author Share Posted March 14, 2017 i have download omnibot 0.66 install on C:\Program Files (x86)\Omni-Bot et folder E:\jaymod+omnibot\omnibot i have create The connection et.exe I pasted the link the command line E:\jaymod+omnibot\ET.exe +set dedicated 2 +set net_ip 192.168.1.64 +set net_port 27960 +set sv_maxclients 12 +set fs_game jaymod +exec jaymod.cfg +set omnibot_enable 1 but have this message bot addbot 1 1 omnibot not loaded or this ]bot addbot 1 1 Unknown command "bot" I'm going crazy because of a stupid configuration if you load the omnibot mod and create a game if I add bots work what makes me nervous is that the first time that I downloaded worked omnibot if load omnibot mod only and write on console \omnibot_enable 1 \omnibot_enable omnibot_enable" is:"1" default:"0" ]/bot addbot 1 1 Sample Default Bot Profile [bOT]Phi: Changing Class to: SOLDIER [bOT]Phi connected [bOT]Phi entered the game [bOT]Phi has joined the Allied team! [ /condump omnibotwork.txt Dumped console text to omnibotwork.txt. Quote Link to comment Share on other sites More sharing options...
DoubleDragon Posted March 14, 2017 Share Posted March 14, 2017 (edited) omnibot path is relevant to the wolf et directory it has to be like ./omni-bot from where the et.exe is executed from; like all map files are relevant to the default path to etmain but for omnibot should be just wolf directory ./ give or take the command is / or ./ to omnibot.dll path don't mean omnibot.dll but the mp_x86.dll's are located if it's omni-bot folder then just put ./omni-bot with or with out the dot Edited March 14, 2017 by DoubleDragon Quote Link to comment Share on other sites More sharing options...
DoubleDragon Posted March 14, 2017 Share Posted March 14, 2017 (edited) Now to explain direct path directory. This is the omni-bot server.cfg inside my omnibot folder. using this to make way points but it is correct. omnibot_enable 1 omnibot_path "C:\Program Files (x86)\Wolfenstein - Enemy Territory\etmain\omni-bot" remove +set omnibot_enable 1 in your et short cut to the config inside the omnibot folder this would be a direct approach to executing the base path if your having trouble getting the correct path open the directory and right click on the dll and check the properties for the path copy it in return you will receive this message. the first red line is a warning cannot find ./omni-bot cause it's in omni-bot folder not etmain this is a mod approach not a pub approach there is a difference most times etpub by default is the wolf directory unless stated otherwise in a config or shortcut. Id advise you to create two more configs one server.cfg the other omnibot.cfg they don't have to have the full server settings cvars just the ones for omnibot that are relevant to the paths to use if your using a jaymod.cfg then keep those seperate from the others and add +exec server.cfg +exec omnibot.cfg by default they will find the path relevant to wolf directory etmain so you will have to put these in etmain as well then in the omnibot folder make a server.cfg doesn't have to have a lot of information again this will be used to make the bot names and teams like for instance bot 1 1 nameofbot the first 1 is class the second 1 is team then the name of bot all this off top of my head not 100% accurate but the idea is logical sorry kinda busy today just trying to speed things up a bit explaining will return later today with more time if you can't resolve it let me know will TV remote it for you later today maybe. almost forgot the pic this is what the output will return if it's in a different mod folder other then ./omnibot path Edited March 14, 2017 by DoubleDragon Quote Link to comment Share on other sites More sharing options...
Lenovo Posted March 14, 2017 Author Share Posted March 14, 2017 I made a mess but now works omnibot 0.85 I glued inside the folder omnibot 0.66 and now omnibot is loaded Now I have another problem if I create a server that does not use the PC to play, the computer does not see that I use to play the game and even if I connect with the ip is on hold. but if I create a server from the pc I use to play on computers that do not use to play sees the game and connects I looked at the setting of 2 lan cards, ip are automatically 192.168.1.64 if I create dedicated lan with this ip (PCs are seen) (win10 pro 64 bit) 192.168.1.66 if I create dedicated lan with this ip (PCs are not seen) (win7 pro 64 bit) Quote Link to comment Share on other sites More sharing options...
DoubleDragon Posted March 14, 2017 Share Posted March 14, 2017 (edited) you have to use your dynamic ip for online not the router ip gateway look for what is my ip in google or network tools this similar website provides the ip on the top of the page when you open it. http://www.whatsmyip.org/ and the ip will end with :27960 for port of et udp/tcp so if its 1.2.3.4 its 1.2.3.4:27960 guessing maybe don't need port number but you can try both it's been a while sense I tried to host but you can share it locally but before you give out your ip address make sure your firewalls are set to take in only for port access if you plan on giving it out to local friends or they will have more then just access to game in your system. Also to point out that some routers don't except in route pings so you may have to open the port for 27960 in the router and give it access to port . Edited March 14, 2017 by DoubleDragon Quote Link to comment Share on other sites More sharing options...
Lenovo Posted March 14, 2017 Author Share Posted March 14, 2017 I solved it by changing windows 7 operating system to win 10 Now with all and 2 PCs with Win 10 you see it is I create with a PC is that I create with each other Now I wish I could jump like on jaymod FA server and be able to use the syringe stamina. I added the bots but those of version 0.85, are invincible I may have something wrong I have written bots addbot 1 1 I have written bots addbot 1 2 I have written bots addbot 1 3 I have written bots addbot 1 4 I have written bots addbot 1 5 I have written bots addbot 1 6 I have written bots addbot 2 1 I have written bots addbot 2 2 I have written bots addbot 2 3 I have written bots addbot 2 4 I have written bots addbot 2 5 I have written bots addbot 2 6 I wish I could enter the bots with weapons I say I would like to set right the commands g_ I also noticed that in jaymod.cfg there are not all commands You do have to add another cfg to be loaded later? Quote Link to comment Share on other sites More sharing options...
DoubleDragon Posted March 14, 2017 Share Posted March 14, 2017 (edited) Your close to right refer to this manual http://omni-bot.invisionzone.com/wiki/index.php?title=Faqomnibot oh and use g_medic flags g_misc flags g_skill flags do note that when using multiple flags for these cvars is you add them up to a check sum total like for instance g_medic there is 4 8 16 and 32 bit flags you can't use 4+8 cause 8 disables boost but you can add 4+16+32 = 52 is the bit flag depending on which ones you use per cvar you have to add them together to get the results. g_skills 4 carries over to all classes not sure if that affects the adrenaline being enabled or not but it should be you can check it by setting this g_defaultSkills 5 5 5 5 5 5 5 and you will startup with general class Edited March 14, 2017 by DoubleDragon Quote Link to comment Share on other sites More sharing options...
Lenovo Posted March 14, 2017 Author Share Posted March 14, 2017 that the command is used to automatically collect the weapons of fallen enemies? and that to obtain the MP40 Thompson and also in the same bind? I added 30 levels, I set my level 30, but I only 9 available commands, how do I get all the commands available? I added a level of 999 and I added on this level this command example: / Rcon !Levedit -acl +C/About i added all existing commands to the server jaymod jaymod all commands Name / Banner info Usage About Print information jaymod. !about admintest display the administrator level. !admintest [-all] ban Bans a player who is on the atm server. !ban [name | Slot #] [TIME] [reason] baninfo Prints information about a ban. !baninfo [GUID] banlist Displays a list of prohibitions. !banlist banuser Bans a player who is not in atm server. !banuser [GUID] [now] [reason] cancelvote Cancel one vote. !cancelvote Chicken Displays the player is 'running like a chicken'. !Chicken [name | slot #] crazygravity gravity changes after a short time. !crazygravity [on | off] whiner view is that player 'cry like a child'. !whiner [name | slot #] DBLOAD Upload all databases. !DBLOAD dbsave Save all databases. !dbsave disorient disorient someone. !disorient [name | slot #] finger prints player information that is on a server (GUID, IP, MAC, namechanges etc.). !finger [name | slot #] Fling hurls someone. !Fling [name | slot #] flinga throws all players. !flinga _ftime Displays the current time in a fun way. !ftime glow all players flashes. !glow [on | off] Help Print all available commands or help of one of them. !help (command) kick Kicks someone out of servers !kick [name | slot #]! [reason] launch launches someone. !launch [name | Slot #] [distance] launcha launches all players. !launcha levadd adds a database level. !levadd [level #] levdelete Delete a layer from the database. !levdelete [level #] levedit level Changes (name, GText / Gaudio, Privileges). ! levedit [level #] (-name [name] | -gtext [gtext] | -gaudio [Gaudio] | -acl [+ | - privilege]) levinfo prints information about the level. !levinfo [level #] levlist Print List level. !levlist listplayers to print a list of players that are in atm server. !listplayers lock Locks a team. !block [r | b | s] lol Generate grenades close to someone. !lol [name | Slot #] [# Nades] lsplayers Same! listplayers, but with another layout. !lsplayers Mute Mute someone (who can not speak / vote after that). !mute [name | slot #] News Plays sound heard from the specified paper. !news [map] NEXTMap Changes map to the next in maprotation. !NEXTMap Orient Orient someone who is disoriented. !Orient [name | slot #] Page to edit the page in commands like !banlist or !userlist. !page [Page #] pants strips someone of his pants. !pants [name | slot #] panzerwar starts / ends the war with only panzer. !panzerwar [on | off] Pause Pause time (no one can move). !pause pip Glitters someone. !pip [name | slot #] Pop Pops someone's helmet !pop [name | slot #]putteam change someone teams !putteam [name | slot #]! [R | b | s]rename Rename someone. !rename [current name | Slot #] [new name] reset restart map & XP restores all the players have gained on this map. !reset resetmyxp Restore your XP. !resetmyxp resetxp Restore someone XP. !resetxp [name | slot #] restart Restarts the current map. !recommences revive Revives someone. !revive [name | slot #] seen controls when someone was the last time on the server. !seen [name] setLevel Sets the level of administration of a player. !setLevel [name | Slot #] [level] shake Shakes someone. !shake [name | Slot #] [seconds] shuffle team Shuffles from XP. !shuffle Slap Slaps someone. !slap [name | Slot #] [give] smite strikes someone. !smite [name | slot #] sniperwar starts / ends the war with only K43 / Garand. !sniperwar [on | off] Spec Spec someone (like / follow). !spec [name | slot #] spec999 puts all players with ping around 999 to spec. !spec999 Splat Splats (gibs) someone. !splat [name | slot #] weaves Splats (GIBS) all players. !repayment State print server information. !status Swap Allies team switches with Axis. !swap Shooting Shooting someone. !throw [name | Slot #] [distance] Throwa Generate all players. !Throwa time to print the current time. !time unban Unbans a banned player. ! unban [GUID] unlock unlocks a locked team. !unlock [r | b | s] unmute audio reactivated someone who is disabled. !unmute [Player] reactivate one takes a game to pause. !unpause uptime Prints server uptime. !uptime userdelete Delete user from the database. !userdelete [GUID] USEREDIT user changes in the database. !USEREDIT [GUID] (-name [name] | -gtext [Gtext] | -gaudio [Gaudio] | -acl [+ | - Privilege]) userinfo prints user information from the database. !userinfo [GUID] userlist to print a list of users from criterium specified (name, level, since, ip). !userlist (-name [name] | -level [# level] | -From [now] | -ip [iP]) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.