Jump to content

Recommended Posts

Posted

Hi all, 

 

I never went too deep into cfg knowledge, so I'm very amateur on the topic and there probably are some improvements to provide on my cfg. 

If some of you better on this topic could give a glance to that, it would be much helpful. 

 

Thanks alot   :)

 

 

 

Intel Core i5-3470 CPU
3.20GHZ 3.20GHZ
RAM 8GO
NVIDIA GeForce GT730
Windows10 
 
Playing mainly on Jaymod and NQ FA servers.

 

 

 

etconfig.cfg

  • 4 weeks later...
Posted

This is what I would change in your config. I left your old values in () so you have a reminder if you want them back as you had them before.

 

seta cg_drawMuzzleFlash "0" (1)

seta cg_muzzleFlash "0" (1)

seta cg_muzzleFlash "0" (1)

seta cg_bloodTime "0" (90)

seta r_drawfoliage "0" (1)

 

seta com_soundMegs "48" (24)

seta com_hunkMegs "256" (128)

seta com_zoneMegs "48" (24)

 

seta m_pitch "0.01501" (0.022)

seta cg_bobyaw "0.000" (0.002)

  • Like 1
  • Platinum VIP
Posted (edited)

m_pitch is very subjective. I used .016 for a long time, .022 for awhile and now .017 (Thanks Hiro - wherever you are) and I really don't see much of a difference. Now, tbh, I'm, no pro aimer, so maybe for me, there is no real difference or I just don't know what the difference is supposed to be.

 

Also, do the specs for your rig really matter in a cfg?? I guess I don't know how or what you'd change depending on CPU, GPU, RAM, etc

Edited by -=HipKat=-
  • Like 1
Posted

Thanks alot for the time spent on my cfg guys, I'll give a try to your suggestions  :)

Posted

This is what I would change in your config. I left your old values in () so you have a reminder if you want them back as you had them before.

 

seta cg_drawMuzzleFlash "0" (1) YES its very usefull specially for tracking an ennemy trough smoke while they are shooting 

seta cg_muzzleFlash "0" (1) i would suggest "2" which allows you to see NOT YOURS(that can be a bit distracting) but the ennemys muzzleflash ONLY!

(silent mode at least)

Posted

seta r_drawfoliage "0" (1)

 

 

Isn't this cheat protected anyway? Or am I mixing it up with something else. 

Posted

@luventaz

I am not familiar with settings specific to silent mod. This variable might not even be active, at least I can't find it on cvar list on antman.info. I used common sense when I decided to set it to "0".

 

Setting m_pitch "0.01501" should help to keep cross-hair at certain level. To test it, change m_pitch value and then move cross-hair up-down. You will notice this is harder with value "0.01501" than with "0.022"

 

@SadElf

You are right with r_drawfoliage considering FA servers, but this is not true with every ET server.

Posted

Thanks guys for your inputs. I tried them yesterday on Jay2, but didn't see any change. Maybe cause it's Jaymod, don't know.

 

For this one : "seta r_drawfoliage "0" (1)", if it's cheat protected, I shall probably just leave it as it is ?

Posted (edited)

 

This is what I would change in your config. I left your old values in () so you have a reminder if you want them back as you had them before.

 

seta cg_drawMuzzleFlash "0" (1) YES its very usefull specially for tracking an ennemy trough smoke while they are shooting 

seta cg_muzzleFlash "0" (1) 

 

its actually

seta b_muzzleflash "2"  which allows you to see NOT YOURS(that can be a bit distracting) but the ennemys muzzleflash ONLY!

(silent mode at least)

 

Edited by luventaz
  • Like 1
Posted

luventaz, you should learn how to reply when you use quotes :D (you shouldn't write into the "quote" box)

Exactly, I know of b_muzzleflash, but that setting either was already set on "2", or wasn't included at all (don't remember anymore, but would include it otherwise).

  • 2 weeks later...
Posted

luventaz, you should learn how to reply when you use quotes :D (you shouldn't write into the "quote" box)

 

Exactly, I know of b_muzzleflash, but that setting either was already set on "2", or wasn't included at all (don't remember anymore, but would include it otherwise).

quote  :P 

  • Like 1
Posted

look at other peoples config, compare, try them out, find out what you like. 

 

Here are some suggestions of settings you could play around with. (This is what I use in my config)

 

bind MWHEELDOWN "cg_fov 90; sensitivity 1.20"
bind MWHEELUP "cg_fov 105; sensitivity 1.45"
 
if bad/unstable fps, turn off blood. Blood might also mak it difficult to see? Long time since I played with blood on
 
com_blood 0
cg_bloodtime 0 
cg_noAmmoAutoSwitch "0"
cg_autoReload "0"
cg_autoswitch "0"
cg_tracers 0
 
 
seta r_gamma "3.0"
seta r_picmip "3"
seta r_lodbias "-999"
seta r_intensity "1.5"
seta r_mapoverbrightbits "1.0"
seta r_overbrightbits "1"
seta r_dynamiclight "0"
seta r_detailtextures "0"
seta r_ignorehwgamma "1"
seta r_subdivisions "4"
seta r_lodCurveError "450"
 
are you using r_mode -1?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.