Rop Posted June 10, 2013 Share Posted June 10, 2013 Jow people, im finally back with a new laptop, but cant get my exec file right. Can someone help me out pls en write me a decent config file ? CPU: Model + speed of the cpu --> (*) RAM: How much memory on your PC or Laptop --> (*) Graphic Card: Model --> (*) Monitor: Size of your screen + Resolution + Refresh Rate Internet connexion and speed: xdsl or cable or modem --> (*) Game graphics: High or ugly (you want to see all graphic details in the game Or you don't care cos you looking only for better performance.) What resolution you play with: Not your Monitor resolution but game resolution) --> (*) What Sensitivity: you want for your mouse between 0.1 to 30 (default is 5) --> (*) What Crosshair: see the picture below --> (*) What FOV you want: see the picture below --> (*) and if you want some specific binds please tell us what and with what key you want? i7-3630QM processor (tot 3,40 GHz, 6 MB cache 8 GB DDR3 SDRAM at 1600MHz 2 GB nVidia GeForce GT 650M 3D (ofcourse playing W:ET in 2D) 44 cm (17.3") 3D High Definition+(1920 x 1080) LED met TrueLife / refresh rate: 120Hz (but when its better to lower it pls tell me.) Cable, max DL speed 240 kb/s (i know, it sucks) High 1920x1080 (can be less when its better for config file/gameplay) 4,35 5 - red dot fov: 110 No binds needed, that i can manage myself when et runs again. If someone can help me out with this thingy would be great, because somehow i cant play normally atm. Cheers Roppie Quote Link to comment Share on other sites More sharing options...
S3ti Posted June 10, 2013 Share Posted June 10, 2013 which mods do you play? Quote Link to comment Share on other sites More sharing options...
Rop Posted June 10, 2013 Author Share Posted June 10, 2013 which mods do you play? NQ mostly...90% off the time ! Quote Link to comment Share on other sites More sharing options...
S3ti Posted June 10, 2013 Share Posted June 10, 2013 Try this one, I don't play nq but I added the additional cvars from the manual, though most of them at standard values. Place this autoexec file in your noquarter folder (etmain folder works also), it will be executed everytime ET starts. I listed some settings that may require a change, if you only change them in game and not in the config they will reset everytime ET starts. - No Keybinds, but you can do them also in game, they won't reset. - Eyecandy stuff is all on and maxed out so you can be sure that enemys can hide everywhere and you see absolutely nothing when you get hit - Punkbuster is disabled, if you need it enabled (for xpsave) change the last line from "pb_cl_disable" to "pb_cl_enable". - Downloads are disabled so you don't download additional soundpacks and stuff if you don't want to. If you need maps from the server or want them to be generally enabled change "cl_allowdownload 0" to cl_allowdownload 1" - Name has to be changed in the config Brightness settings, those are dependant from your videocard, monitor settings and personal preference, play around till you get the brightness you like: - r_gamma 1...3 - r_ignorehwgamma 0 or 1 (if this is 1 changing r_gamma looks different and also needs vid_restart!) - r_intensity 1...1.5 - r_mapoverbrightbits 2 or 3 autoexec.cfg 3 Quote Link to comment Share on other sites More sharing options...
Rop Posted June 10, 2013 Author Share Posted June 10, 2013 Works like a charm after a few small tweaks !! Perfect ! Thanks m8, ill pay you back someday #lock pls Quote Link to comment Share on other sites More sharing options...
S3ti Posted June 11, 2013 Share Posted June 11, 2013 Forgot to change r_displayrefresh, it's 75 but you can set 120 based on your specs. Should run more smooth then Quote Link to comment Share on other sites More sharing options...
Shana Posted June 29, 2013 Share Posted June 29, 2013 Also you could set your fps to one level(better aiming without fps spikes) /seta max_fps 125 /seta com_maxfps 125 Tried those on brother's pc(almost the same specs as yours) and it's really smooth P.S. Sorry for such late answer... Quote Link to comment Share on other sites More sharing options...
Masa_1964 Posted June 29, 2013 Share Posted June 29, 2013 LoL rop... stop tweaking!!!! U kill me Masa_1964 Quote Link to comment Share on other sites More sharing options...
Rop Posted June 30, 2013 Author Share Posted June 30, 2013 Thanks guy's, working like a charm. @masa youre just getting old and slow, i suck just as much as i used too ! Quote Link to comment Share on other sites More sharing options...
Death_Reincarnated Posted June 30, 2013 Share Posted June 30, 2013 (edited) I would change/add the following: 1) seta com_hunkMegs 192 to 256 2) seta cg_atmosphericEffects 1 to 0 3) seta cg_wolfparticles 1 to 0 4) seta cg_bloodDamageBlend 1 to 0 5) seta cg_bloodFlash 1 to 0 6) seta r_gamma 1.5 to 1.8 or 1.9 7) seta r_picmip 0 to 2 There are several more but I think these might be ok. It's up to you if you make the changes or not. D_R Edited June 30, 2013 by Death_Reincarnated Quote Link to comment Share on other sites More sharing options...
jaie Posted June 30, 2013 Share Posted June 30, 2013 why would you change these? Quote Link to comment Share on other sites More sharing options...
Death_Reincarnated Posted July 1, 2013 Share Posted July 1, 2013 why would you change these? To help improve his gameplay but its up to him because it will make the game look "not as pretty". Quote Link to comment Share on other sites More sharing options...
Shana Posted July 1, 2013 Share Posted July 1, 2013 Check this http://fearless-assassins.com/topic/49238-fps-increase/ You will see how the game looks by lowering graphics as much as you can(I've got from 40 to 180 fps) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.