Mev!sto Posted January 28, 2013 Posted January 28, 2013 heres the problem: when go in to ET my cursor behaves like it gets speed up as far as i move mouse, like when i move it on left firstly it goes slow for like few inches and than it gets so fast i can do nothing - mostly that f*(ker ends in one of corners, for example I went on spectators and when I pushed mouse forward -> I've watched sky 1sec after :S, backwards -> ground. It's not sensivity and i reseted settings to basic but it keeps annonying me and not letting go. I dont think its a mouse problem (but it seems like work lil slower when I quit ET for a while) couse it works fine outside ET - without speeding up and i tested it on my magic mouse from Mac - same thing. It started like yesterday, but i restarted ET and could play. Now I can do shit :< Quote
Shinobi Posted January 28, 2013 Posted January 28, 2013 Have you tried with another mouse? It may be a problem with the mouse itself, if not then most likely something that is bothering the connection of the mouse. In worst case scenario, you might have to re-install ET if the problem isnt the mouse or sensitivity. Make sure if you do decide to re-install ET backup your Etkey on a flash drive so you can repaste it in Etmain and keep ur profile Quote
Clan Friend SunLight Posted January 28, 2013 Clan Friend Posted January 28, 2013 Which OS do you use? Did you change any setting in mouse drivers, etc.? what's your value for /sensitivity /m_yaw /m_pitch /cl_mouseaccel I don't think it's a mouse problem if it moves normally on your desktop. Don't reinstall et just to change some config settings, it's a waste of time. Quote
Mev!sto Posted January 28, 2013 Author Posted January 28, 2013 i have normal mouse connected to windows on vista and I connected magic mouse to see just how it works on it month ago. So both of em act the same when I set ET. sensitivity: "8.703125" default "5" m_yaw: "0.022" default "0.022" m_pitch: "0.022000" default "0.022" cl_mouseaccel "0" default "0" Quote
Mev!sto Posted January 28, 2013 Author Posted January 28, 2013 another clue: when ipoint cursor (on spectators) to ground and move it to the left or right everything spins Quote
Clan Friend SunLight Posted January 29, 2013 Clan Friend Posted January 29, 2013 Your et settings are ok. Most likely some other software moves your cursor while you play et, adds acceleration, or it confines it in some place (check your mouse drivers, o/s mouse settings, control panel etc.) Other utilities affecting mouse movement, or moving the cursor could be the cause as well. You could try rinput since that bypasses the cursor movement on your desktop, and see what happens, but you should try to figure out where the problem is, even if rinput fixes it. http://fearless-assa...lp-aiming-in-et Quote
PiNoY Posted January 29, 2013 Posted January 29, 2013 Is it behaving like that only inside ET or the same outside ET? Try using another mouse temporary and see. Quote
Mev!sto Posted January 29, 2013 Author Posted January 29, 2013 I connected magic mouse to see just how it works on it month ago. So both of em act the same when I set ET. Quote
Clan Friend SunLight Posted January 29, 2013 Clan Friend Posted January 29, 2013 (edited) Does your game run smoothly (high fps) aside from this mouse problem? Have you tried with rinput as I suggested? If rinput works it's not your mouse, and it's not your ET installation (which is very unlikely anyway) so you should search the reason elsewhere (mouse drivers, ...) p.s. I think there is a way (but I don't remember right now) to show your cursor while et is in windowed mode, maybe that could help finding the cause... Edited January 29, 2013 by SunLight Quote
Mev!sto Posted January 29, 2013 Author Posted January 29, 2013 am I retarded and didnt set it properly or another thing is messed up (I just packed it out of rar and set) Quote
Quovadis Posted January 29, 2013 Posted January 29, 2013 am I retarded and didnt set it properly or another thing is messed up (I just packed it out of rar and set) http://www.2shared.com/file/VFxEDY6M/RInput.html try this one Quote
PiNoY Posted January 29, 2013 Posted January 29, 2013 maybe run program as Administrator? or disable antivirus? Quote
Quovadis Posted January 29, 2013 Posted January 29, 2013 maybe run program as Administrator? or disable antivirus? this is version 1.2 if I am not wrong , I never could get it to work even with a bat "start C:\ET\RInput.exe ET.exe" file .The last link I added is the last version which should work properly. Quote
PiNoY Posted January 29, 2013 Posted January 29, 2013 i have 1.31 version sequential edition, that comes with single DLL file. Quote
Quovadis Posted January 29, 2013 Posted January 29, 2013 i have 1.31 version sequential edition, that comes with single DLL file. I meant for his problem Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.