I need help!

[LAS]

Hello. Sorry that first post and the first topic I address immediately for help.

I'm from a small mills Ukraine.

English I know surface, so I am a translator. So please do not laugh, but to help solve my problem.

 

I had a 20-inch monitor, I played the game and grief do not know. But that's bought a new 27-inch monitor and all, like substitute.

I can not configure the game. That just do not set up, the mouse sensitivity, the various settings in the game, nothing works. In the past, played, used to kill of 3-4, with one horn, now if the two happen, it very well.

 

Can someone tell what is or will ask leading questions, happy to listen.

 

Reread already a bunch of forums, may not be there watching and looking, but never found what I needed

 

Thanks for the tips

[Jorz]

ti pa rouski?

Ya ponel sto ti nie mozis miniat sensitivity etc?

Game console dayot tibie palomkou?

Sdelai adnou photo,tak ya smagou pamoch.

/autoscreenshot to sdelat photo.

 

Sb move to appropriate place.

[LAS]

Я могу написать и по русски.

Нет, поменял монитор и не могу настроить чувствительность. Получается, что раньше я мышку прямо как чувствовал, управлял, развороты делал в любой момент, то сейчас она как бы плавает, нет твердости в ней. Ну как еще объяснить, я не знаю. Может это из-за монитора, но не хочется играть в оконном режиме на таком мониторе.

Мышка была А4Tech AK47, сейчас A4Tech X7 XL-750BH. Но дело не в мышке. Что то случилось из-за разрешения, а как под него подстроиться, я уже и не знаю

[Jorz]

ohh noooo,i cant read or write russian

only speak it,and write with latin letters.

[milli vanilli]

google translate

 

I can write and in Russian.

No, I changed the monitor and I can not adjust the sensitivity. It turns out that I used to feel just like a mouse, manage, making U-turns at any time, but now it kind of floats, there is no hardness in it. Well, how else to explain, I do not know. Maybe it's because of the monitor, but do not want to play in windowed mode on this monitor.

Mouse A4Tech was AK47, now A4Tech X7 XL-750BH. But it's not a mouse. What has happened because of the permission, but as for him adjust, I do not know

[Crasher]

The mouse has nothing to do with the monitor, it may that your computer is just slow.

 

Edit: I'm slow, rough english translations make me that way!

Edited February 16, 2011 by Crasher

[JoeDirt]

Press ` key to open console and type /sensitivity you should get sensitivity 5.0 or something similar, try lowering it or raising it to your satisfaction.

 

The mouse has nothing to do with the monitor, it may that your computer is just slow.

 

It appears that you are slow and don't know how to read.

[Dupstep]

I suggest you to look at autoexec file.

Ofcurse,it restarts your config everytime.

Look at jaymod folder,there will be autoexec.

Now I´m pretty sure you don´t understand commands.

So here they are..

Find in autoexec r_mode command,delete it and replace with these:

 

seta r_mode "-1" 
seta r_customwidth "1920"
seta r_customheight "1200"

 

and for settings..etc

Mouse sensitivity

seta sensitivity "2.06"

 

For HUD stuff,I suggest you to look at cg_ commands in autoexec

Edited February 16, 2011 by Dupstep

[LAS]

seta r_mode "-1"

seta r_customwidth "1920"

seta r_customheight "1200"

 

Such authorization does not support video.

Perhaps, when changed, then it will be better

 

At the moment, the maximum 1620 to 1080

This is in full screen mode.

You can wager the maximum, but only in windowed mode (1920х1200)

 

And I am suffering with a sensitivity of the third month

[LAS]

I probably throw the monitor and system unit with windows

http://et.trackbase.net/index.php?mod=playerinfo&idx=37788

[LAS]

The system unit is not flown as an additional hard drive )))

However, a second problem after reinstalling windows, with squat I can not see with binoculars, just does not work

[LAS]

Then someone reads?

[Vanaraud]

The system unit is not flown as an additional hard drive )))

However, a second problem after reinstalling windows, with squat I can not see with binoculars, just does not work

 

Please would you explain more because I cant understand what you are saying.

[LAS]

When standing or running, hit the bind '"+ zoom" binoculars included

When the squat and press, bind '"+ zoom" binoculars not included

[LAS]

In the settings screen resolution is 1920x1080

seta r_mode "-1"

seta r_customwidth "1920"

seta r_customheight "1080"

When you load slips to 800x600 and so every time

Constantly having to reload at the beginning

What should I do?