Connection Problems on ET

[Remus]

Hello

 

i hope to get a answer on my problem

 

After connecting to my favorite Server (Beginners 1) i got a very bad ping... and also my connection is deleted.

(on other Servers isn´t this problem 😕 )

I select DSL / Cable... and after a few seconds it´s again unselected.

 

And this every time... It´s not possible to play with this problem.

 

I hope someone as an idea or a solution

 

Thanks

 

Remus

[Buckwild]

You could try moving jaymod\Profiles\"you"\etconfig.cfg from ET,

A new one will be generated...With default settings.

If that doesn't help, Remove etmain\Profiles\"you"\etconfig.cfg.

Ingame at Beginners: Open ET console(Press ~), Type:/seta rate 45000 Press Enter

 

 

[Remus]

Hello Buckwild,

 

i tried all of your points.

 

After testing there is no improvement 😕

 

 

[RedBaird]

Were you just playing on Beginners#1 and were you on Beginners #2 1/2 hour before that? 

[GHARIB]

46 minutes ago, Remus said:

I select DSL / Cable... and after a few seconds it´s again unselected.

It is fine to let "unselected" in the menu, it may be the case, because you have a custom rate 

 

Basicaly, the menu has "preset rate values"
If you choose modem it will set a rate of 4000, if you choose ISDN it will set it to 5000, and if you choose LAN/CABLE/xDSL it will set it to 25000.

Here the code of the menu about it :

cvarFloatList { "Modem" 4000 "ISDN" 5000 "LAN/CABLE/xDSL" 25000 } cvarListUndefined "Unselected"

 

If you chose a connection type on menu and connect to server which forces to another rate, it may change it to "unselected", because it has modified the default rate you have selected.

The "unselected" is due to manual rate config / or server forcing rate

 

 

1- clean your TCP/IP stack:

 

2- please follow this

 

 

Edited March 27, 2022 by GHARIB

[Remus]

Thank you

 

It´s running

[GHARIB]

3 hours ago, Remus said:

Thank you

It´s running

/problem solved by reseting TCP/IP stack (confirmed by PM)

 

 

Edited March 27, 2022 by GHARIB

[spectator]

how should I configure for a wired connection? or is it not any different? Should I alter my config file?