ET probs!

[=F l A=Pandora]

yaaw wassup wasuuuupp!!

 

hey guys!

 

my external harddisk just died , like wtf!

now iv'e downloaden ET again from this website, started it up, saw the list and was looking for F|A servers off course.

couldnt find the reqruiting server, where i am/was always playing, so quited the game and started it up again.

now i cant see the list anymore. my internet is OK..

 

what to do now?!

[Reptile*]

have you tried to connect straight via IP: 8.9.4.227:27960

If you meant jaymod1 recruiting?

[=F l A=Pandora]

problem solved! but now i have a new problem.. how can i put here a screenshot? then i can show you

[Bajan]

You could use the screenshot option from xfire for that.

[Dest!Ny]

use ~ to open console (ctrl+~ for a smaller console so you can see more of the game) and type /autoscreenshot sicne you arent in any mod I think your screenshot will be put in your etmain folder but if you want to check it you can sort your folders by last edited to see which folder could have added the screenshot.

 

for putting it on the forum you can use the more reply options button, once clicked youll see "Attach Files" at the bottom of your screen, there you can choose which file to upload and then you can add it to your post

[=F l A=Pandora]

the problem was, ui_mp_x68.dll ..  searched for it, downloaded it, and now ET cant read my config.....

[-=First=-]

Here you've a list of all ET servers :

http://fearless-assassins.com/enemyterritory-servers.html

 

you can type into console -> /connect + ip.

For example : recruiting server : /connect 8.9.4.227:27960

 

you can check information about every servers through console too :

/serverstatus + <name>.clan-fa.com

For exemple, as I'm playing on silent1, I check /serverstatus silent1.clan-fa.com, then all players & bots appear in the console.

 

+ if you are playing on a server, then you can also check other server, if another one need admins etc

 

 

edit : can't read your config ? what does it say ?
do you have a config that you exec like this through console : /exec pandora.cfg 

Edited June 19, 2014 by -=First=-

[Dest!Ny]

Found this somewhere on the net, maybe you can run through it and youll find the solution.

 

 

Game code (ui_mp_x86.dll failed pure server check error)

How to fix the "Game code (ui_mp_x86.dll) failed pure server" error.

Introduction and basic knowledge:

In an attempt to diminish the number of hacks/cheats other than Old School Bots which can be utilized by players while playing on our servers, we are running those servers as "pure" servers. Running the servers as "pure" servers will prevent connections by players using modified Enemy Territory and ETPub Mod files, without affecting connections by players using any of the approved Old School Bots.

Why do this?

To provide a fair game to everyone.

Troubleshooting

Question: When joining a server I receive an error: Game code(ui_mp_x86.dll) failed pure server check.

Answer: There are two general reasons for this issue:

- One or more of your dll/pk3 files are corrupt (modified).

- Vista security causes trouble.

With both reasons the best solution is to completely reinstall Wolfenstein - Enemy Territory, below this will be explained.

How to reinstall Wolfenstein - Enemy Territory properly

Follow everything step by step.

On Windows Vista

1. Copy Etkey file (you will find the etkey in C:/Program Files/Wolfenstein - Enemy Territory/etmain) to a safe place;

2. Uninstall Enemy Territory;

3. Delete the remaining C:\Program Files\Wolfenstein - Enemy Territory folder;

4. If it isn't done yet: disable UAC (User Account Control)

Info about disabling UAC: http://www.howtogeek.com/howto/windo...windows-vista/

I'll explain how to disable UAC below also.

5. Restart your computer;

6. Installation Enemy Territory Version 2.55: before you start installing: right click on the installer > properties > compatibility tab > select "run as administrator" and "run in XP compatibility mode" 

(ET installer available to download in high speed here: ftp://ftp.games.skynet.be/spool1/gam...ein/WolfET.exe

And after you've done both, install the game.

7. Place the etkey back in the etmain folder (C:/Program Files/Wolfenstein - Enemy Territory/etmain)

8. Go to the ET directory (C:/Program Files/Wolfenstein - Enemy Territory) and before you start the game the first time, right click on the ET.exe, and then do the same as you did with the installer (right click on ET.exe > properties > compatibility tab > select "run as administrator" and "run in XP compatibility mode")

Start ET after you've done both, make a new profile:

- it's best to set the resolution the same as your desktop resolution.

- your profile name can only contain a-z characters.

- Select the correct connection type, a wrong one will cause lags.

Don't forget to enable Punkbuster.

9. install your bots, again, before you start your bot the first time, right click on your bots .exe file > properties > compatibility tab > select "run as administrator" and "run in XP compatibility mode"

On Windows XP

1. Copy the Etkey (you will find the etkey in C:/Program Files/Wolfenstein - Enemy Territory/etmain) to a safe place;

2. Uninstall Enemy Territory;

3. Delete the remaining C:\Program Files\Enemy Territory folder.

4. Restart your computer.

5. Install Enemy Territory Version 2.55.

Here you can download the ET 2.55 installer (high speed):

ftp://ftp.games.skynet.be/spool1/gam...ein/WolfET.exe 

6. Place the etkey back in the etmain folder.

7. Start the game, when you make a profile:

- it's best to set the resolution the same as your desktop resolution.

- your profile name can only contain a-z characters.

- Select the correct connection type, a wrong one will cause lags.


Don't forget to enable Punkbuster.

[=F l A=Pandora]

thnx! but now i ahve a config problem

[=F l A=Pandora]

 

Found this somewhere on the net, maybe you can run through it and youll find the solution.

 

 

Game code (ui_mp_x86.dll failed pure server check error)

How to fix the "Game code (ui_mp_x86.dll) failed pure server" error.

 

Introduction and basic knowledge:

 

In an attempt to diminish the number of hacks/cheats other than Old School Bots which can be utilized by players while playing on our servers, we are running those servers as "pure" servers. Running the servers as "pure" servers will prevent connections by players using modified Enemy Territory and ETPub Mod files, without affecting connections by players using any of the approved Old School Bots.

 

Why do this?

 

To provide a fair game to everyone.

 

Troubleshooting

 

Question: When joining a server I receive an error: Game code(ui_mp_x86.dll) failed pure server check.

 

Answer: There are two general reasons for this issue:

 

- One or more of your dll/pk3 files are corrupt (modified).

 

- Vista security causes trouble.

 

With both reasons the best solution is to completely reinstall Wolfenstein - Enemy Territory, below this will be explained.

 

How to reinstall Wolfenstein - Enemy Territory properly

 

Follow everything step by step.

 

On Windows Vista

 

1. Copy Etkey file (you will find the etkey in C:/Program Files/Wolfenstein - Enemy Territory/etmain) to a safe place;

 

2. Uninstall Enemy Territory;

 

3. Delete the remaining C:\Program Files\Wolfenstein - Enemy Territory folder;

 

4. If it isn't done yet: disable UAC (User Account Control)

 

Info about disabling UAC: http://www.howtogeek.com/howto/windo...windows-vista/

 

I'll explain how to disable UAC below also.

 

5. Restart your computer;

 

6. Installation Enemy Territory Version 2.55: before you start installing: right click on the installer > properties > compatibility tab > select "run as administrator" and "run in XP compatibility mode" 

 

(ET installer available to download in high speed here: ftp://ftp.games.skynet.be/spool1/gam...ein/WolfET.exe

 

And after you've done both, install the game.

 

7. Place the etkey back in the etmain folder (C:/Program Files/Wolfenstein - Enemy Territory/etmain)

 

8. Go to the ET directory (C:/Program Files/Wolfenstein - Enemy Territory) and before you start the game the first time, right click on the ET.exe, and then do the same as you did with the installer (right click on ET.exe > properties > compatibility tab > select "run as administrator" and "run in XP compatibility mode")

 

Start ET after you've done both, make a new profile:

 

- it's best to set the resolution the same as your desktop resolution.

 

- your profile name can only contain a-z characters.

 

- Select the correct connection type, a wrong one will cause lags.

 

Don't forget to enable Punkbuster.

 

9. install your bots, again, before you start your bot the first time, right click on your bots .exe file > properties > compatibility tab > select "run as administrator" and "run in XP compatibility mode"

 

On Windows XP

 

1. Copy the Etkey (you will find the etkey in C:/Program Files/Wolfenstein - Enemy Territory/etmain) to a safe place;

 

2. Uninstall Enemy Territory;

 

3. Delete the remaining C:\Program Files\Enemy Territory folder.

 

4. Restart your computer.

 

5. Install Enemy Territory Version 2.55.

 

Here you can download the ET 2.55 installer (high speed):

 

ftp://ftp.games.skynet.be/spool1/gam...ein/WolfET.exe 

 

6. Place the etkey back in the etmain folder.

 

7. Start the game, when you make a profile:

 

- it's best to set the resolution the same as your desktop resolution.

 

- your profile name can only contain a-z characters.

 

- Select the correct connection type, a wrong one will cause lags.

 

 

Don't forget to enable Punkbuster.

 

how bout windows 7?

[Reptile*]

Do you run ET.exe as an administration?

[Buckwild]

Start ET, Press Esc, Profiles,

 

Create new profile in ET and set as default after You go here for ET patcher 2.60b: 

 

http://www.mediafire.com/download/gmk4mb7ylo4v582/ET_Patch_2_60b+with+etkey.zip

 

Create folder: screenshots in the ET mod folder that You want to take screenshots in.

 

Press F11 in-game to take screenie.

 

 

Edited June 19, 2014 by Buckwild

[=F l A=Pandora]

reptile, yes i run it as administrator..  the concole says, couldnt load default.cfg, but it really is in ETmain... what to do now?

[Dest!Ny]

might have something to do with you pak files, do you have pak0, 1 and 2 in your etmain folder?

 

[Ann!b@l]

Probably because when you launched the game for the first time, there was no admin rights allocated. So, the game probably wrote none of the files needed in game directory (may include profile folders, etconfigs or data files).

 

-If you own a personal config, this step is useless. If you own none but have started to do some settings in game then backup the etconfig in C:\Program Files (x86)\Wolfenstein - Enemy Territory\etmain\profiles\Name.

 

-Make sure you run the game with admin rights, just in case. Go in C:\Program Files (x86)\Wolfenstein - Enemy Territory\etmain\profiles\ and delete the folder with your name. Do exactly the same thing in C:\Program Files (x86)\Wolfenstein - Enemy Territory\jaymod\profiles\ this time.

 

- Once done, if you own a personal config, put it in your etmain folder. Same thing if it's the backup of your settings recorded with your previous etconfig but try to rename it with a new name. Launch the game and fill the settings requested as usual when you launch it for the first time. Execute your config with the command \exec Name.cfg.

 

-Now try to connect on Jay1 (Recruiting).

Edited June 20, 2014 by Ann!b@l