FPS drops, performance issues, prehistoric PC?

[FILIPE]

@GwS BadBoy 

 

2.0 Ghz shows because it is not under load. You see I have something in the background turned on. The stupid shows 0.36V heh 😜

 

 

In bios, you need to set the RAM divider corresponding to 1333Mhz.

For example:

FSB - 333MHz, memory multiplier 1: 1.25,

that is: 333 x 1.25 = 416.25MHz, which gives the real clock speed of 833MHz (to get it, multiply the clock speed by 2, because it results from the DDR architecture)

 

 

You can even give yourself a bigger CPU Clock Ratio to get a higher CPU frequency.

Example with e8600 processor:

 

 

 

Edited January 12, 2021 by FILIPE

[GwS BadBoy]

Ufff I wish I understood what you said, I actually spent hours in BIOS changing multiple stuff but then just reseted all of that 😄

I have 75gb free on C : disk i dont think its the issue.

Idk Ima upgrade the OS and then ill see

Edited January 12, 2021 by GwS BadBoy

[FILIPE]

@GwS BadBoy There is no problem with the disk. If you had 2 GB of free space, then yes.

[MikeSlayer]

you could also try turning the graphics right down it will help hold fps you seem to play with some high detail settings

i would try

/r_primitives 2
/r_picmip 3
/r_texturebits 16

/r_detailtextures 0
 

there is many other settings too post your config and we can have a look maybe get ET to run a bit better till u upgrade
 

[GwS BadBoy]

12 minutes ago, MikeSlayer said:

you could also try turning the graphics right down it will help hold fps you seem to play with some high detail settings

i would try

/r_primitives 2
/r_picmip 3
/r_texturebits 16

/r_detailtextures 0
 

there is many other settings too post your config and we can have a look maybe get ET to run a bit better till u upgrade
 

Thank ya mate but already have everything on lowest, u could easily mistake my ET for minecraft haha