Search the Community
Showing results for tags 'issues'.
Found 4 results
-
...i found this on the www and i thought its good to get this pinned. almost all errors are listed and solved. this can be extended. so if you have an issue and a solution, you can post it in here and gonna add it to the list. i deleted some who are useless imo Known errors: 2- CD Key 3- Cg.ClientFrame 5- CL_GetServerCommand 6- Connection Interrupted 7- Could not exec xxx.cfg 8- Could not load OpenGL drivers 9- Could not load an official pak file 10- Could not initialize installation 11- Could not reopen pak0.pk3 12- cl_ParsePacketEntities 13- Client / server game mismatch 14- Client communication failure 15- Disconnected for unknown reason 16- Duplicate Guid / CDkey 17- Integrity failure 18- Error Hunk_AllocatedTempMemory 21- ET.exe crashes without error message 22- ET.exe encountered an error 23- Game code (ui_mp_x86.dll) 24- GLW_StartOpenGL () - could not load OpenGL subsystem 25- Hunk_AllocateTempMemory 26- Ignoring md5tool queries 27- Incorrect et.exe version 28- Can not connect to a server 29- I / O error 31- Losing key packets 32- MD5 Tool: ET.exe md5 tool mismatch 33- Max_Gamestate_Chars_Exceeded 36- O / S Privileges 38- Runtime error 40- Sv_wwwDownload: unexpected wwwdl bbl8r 44- VM_Create on cgame failed 45- Warning Cvar whatever must be EQUAL TO 0 46- can not write to hunkusage 2-CD Key Exact message: Valid CD Key is not reaching GUIDAUTH Server ouYou have been kicked by PunkBuster for a CD Key fail Reason: There is a key conflict Solution: 1) Go to the Etkey.org website. 2) Press "Get a new key". 3) Save it on the desktop. 4) Place the key in your Etmain folder. 3-Cg.clientFrame Reason: Your console continuously displays a series of: cg.clientFrame: 24190 cg.clientFrame: 24191 cg.clientFrame: 24192 Solution: If your variable "cg_stats" is 1, the console displays the number of the frames (images displayed), so try to put this variable on "0" 5-CL_GetServerCommand Exact messages: CL_GetServerCommand: a reliable command was cycled out Reason: After a long download on a server, a command does not find a path. Solution: Attempt to reconnect to the server (open the console and write: / reconnect) 6-Connection Interrupted Huge error message.Often related to an internet connection problem. Solutions 1: 1 / Check that you are not behind a firewall (Antivirus). 2 / Update Punkbuster. And try to connect to a server without Punkbuster (Some servers still run with PB). 3 / Check that the connection mode is selected in the game options (Modem, ISDN, ADSL, LAN). 4 / Check the connection settings in your cfg (all lines "cl_") Solutions 2: We can also try to add these commands in the config: - / cl_maxpackets 30 (number of incoming and outgoing packets) - / cl_packetdup 1 (packet size) - / snaps 20 (modify the SNAP configuration) - / cg_predictitems 0 (removes the "prediction" on the client side.The prediction allows your machine to extrapolate the position of the entities without waiting to receive data from the server.This allows a smooth game) - / rate 25000 (configure the transfer rate) - / cl_timenudge 0 (Leave at "0" (reduced (negative) or increases (positive) the lag but opponents who use an analog modem will become jerky) 7-Couldn't exec xxx.cfg Reason: The path of your CFG is not correct. Solution 1: Put the cfg file in the Etmain folder, and write in the console: / exec xxx.cfg Solution 2: Change the name of your Cfg. Replace xxx.cfg with yyy.cfg 8-Couldn't load OpenGL drivers Reason: It's a problem of drivers coming from the graphics card. Solution: Update your graphics card driver. 9-Could not load an official pak file Exact message: Please check your installation and make sure you have the latest patch and the latest version. Reason: - Either you do not have the right version of a mod (which must be downloaded and installed, by doing a / cl_allowdownload 1 on the server itself) - Either you do not have the correct patch of ET (if you are in 2.60b to pass in 2.60, just install the patch 2.60 over or use one of the many patch selector). - It stuck for example if you install Etpro 3.2.6 with only the ET 2.60 patch. In this case, you must patch AND in 2.60b. - You can check that you do not miss some files in the directory andmain (of style pak0.pk3, pak1.pk3, pak2.pk3, mp_bin.pk3 ...) 10-Could not initialize installation Exact message: Could not initialize installation.File size expected = 270305943, size returned = 270306346 Reason: You just downloaded the game, and when you try to start the installation, this message appears. In the case above, the file is larger than the expected file. It is corrupt, and it must be reloaded. 11-Could not reopen pak0.pk3 Exact message: Could not reopen 😄 \ Program Files \ Wolfenstein - Enemy Territory \ andmain \ pak0.pk3 Reason: The etmain \ pak0.pk3 file is corrupt. Usually by a file recently downloaded to a server. The file pak0.pk3 can not be physically modified since it is a system file of the game, it is actually the downloaded pk3 that modify it somehow. On the other hand, the new pk3 can interact with this pak0 and create conflicts if the pk3 is poorly designed or downloaded. Solutions: 1 / Delete the latest downloaded files in the Etmain folder or the folder of the last mod installed. There is a freeware that cleans up the wrong dl files: LNAcleanet 2 / It may be due to too many pk3 files. Delete a maximum of .pk3 file in Etmain (or other mod files) 3 / Reinstall the patch, or at worst the game AND. 4 / Instead of checking "uninstall", check "repair" when launching the uninstall. 12-cl_ParsePacketEntities Reason: I am disconnected with this error message Solution: Follow the same instructions as the error message on the CD KEY: Valid CD Key. 13-Client / server game mismatch Exact message: - Client / server game mismatch - Could not load an official pak file; verify your installation and make sure it has been updated to the latest version - Protocol Mismatch Between Client and server.The server is trying to join an incompatible version of the game. Solutions: 1 / Either you do not have the right version of a mod (which must be downloaded and installed, by doing a / cl_allowdownload 1 on the server itself for example) 2 / Either you do not have the correct patch of ET (if you are in 2.60b to pass 2.60, just install the patch 2.60 above or use one of many patch selector).It stuck for example if you install Etpro 3.2.6 with only the ET 2.60 patch. In this case, you have to patch ET in 2.60b. 14-Client communication failure Exact messages: Server disconnected - Client communication failure Reason: There is a problem between you and the server. Check if your network does not have a problem. Also see if your box is not offline. 15-Disconnected for unknown reason Reason: This message may appear when your computer takes too long to load a card.The server no longer receiving activity message from you, it expels you. Solution: Try to reconnect by typing in the console: / reconnect Solution 2: Quit the game and restart. 16-Duplicate Guid / CDkey Solution: To solve this problem, simply go to your directory andmain found in wolfenstein - enemyterritory and delete the file etkey. Warning: Any experience gained on servers with "XPsave" will be lost by doing this! To put a key, see the forum "Etkey" 17-Integrity failure Reason: Punkbuster is not up to date. Solutions: 1 / Open the folder Punkbuster: \ Wolfenstein - Enemy Territory \ pb 2 / Select all the files in the folder pb and delete them. 3 / Download the program ETPbSetup.exe 4 / Copy this program into your folder (blank) pb 5 / Launch it, select the Enemy Territory game and follow the steps. 6 / Close ETPbSetup.exe and start the game. 18-Error Hunk_AllocatedTempMemory Reason: The game crashes with this message when one is on a particular map.This is certainly a memory story allocated to ET. Normally it happens when there is in the config com_hunkMegs too high or too low. Solution 1: Check the value of the com_hunkMegs cvar in the config (from the Profile folder, or the autoexec.cfg) and set the value to 256 or 512 (to make sure that all the textures of the maps load) Solution 2: Modify your shortcut to start the game and add + set com_hunkmegs 256 at the end (do not forget to put a space before the + set ...). Your shortcut will look like this: "C: \ Program Files \ Wolfenstein - Enemy Territory \ ET.exe" + set com_hunkmegs 256 21-ET.exe crashes without error message Reason: The game crashes, freeze, or quits in any way without displaying an error message (or at least you do not have time to see it). Solutions 1: 1 / Check that your system has the minimum required. 2 / Check that you have the latest video card drivers. 3 / Check that you have the latest chipsets (for the motherboard). 4 / Turn off (to the maximum) the applications at the bottom of the spot. 5 / Some players have problems also after several map changes. In this case, reboot the computer. 6 / If you have changed the options of the game, restore the default (set recommended). Warning : Punkbuster has noticed conflicts with these materials: Motherboards based on nForce4: If you have a SATA controller: Look at which SATA Controller is present in your system. Then check on the manufacturer's website if there are any driver updates (especially for WHQL drivers). If nothing is found, look for a driver on the same site. You can also check on the website of the manufacturer of the motherboard. If none of these solutions is conclusive: Go to: Mesdrivers.com and download all the updates. 22-ET.exe has encountered an error Reason: ET.exe has encountered an error and needs to close or ET.exe made error.It will be closed. Solutions: 1 / Check your Ram and analyze your pc on viruses and spyware 2 / Allow the firewall to connect with ET 3 / Check that the graphics card does not overheat (and remove the dust in the tower) 5 / Update your graphics card. ID Software Solution for all-gray, black, or other colors 1 / Check to have the right video driver (the last usually) 2 / All applications in the background must be cut to launch the game first. 23-Game code (ui_mp_x86.dll) Exact message: Game code (ui_mp_x86.dll) failed pure server check Solution: Update your graphics card mostly directly on the manufacturer's website Solution 2: Put the game in administrator 24-GLW_StartOpenGL () - could not load OpenGL subsystem Reason: The game encountered an error while loading OpenGL. Solution 1: Put r_stereo 0. Solution 2: Update the drivers of the graphics card. This error is caused by the fact that the game is not able to detect your Open GL drivers for your graphics card. If this error appears in the start window of your game, you must update or reinstall the drivers for your graphics card. Just go to the website of the manufacturer of your graphics card, download and install the latest driver, which fits with your card.If that does not work, simply go and uninstall the current driver and try to reinstall it. WinXP: Right click on your computer's icon -> Properties -> Hardware tab -> Device Manager -> Graphics Cards (click on the small and more) -> Right-click the name of your graphics card, then click uninstall. Win7: Click the Start button -> Control Panel -> Device Manager (In small / large icons view) -> Device Manager -> Graphics Cards (click small arrow) -> right click on the name of your graphics card , and then click Uninstall. For NVIDIA cards: http://www.nvidia.com/content/drivers/drivers.asp For ATI cards: http://www.nodevice.com/driver/company/ATI.html Solution 3: Check the resolution in your cfg. A resolution that is too big can cause a crash. Solution 4: Check if you have not reversed the settings of your resolution seta r_customheight , seta r_customwidth Solution 5: Delete the profile folder. 25- Hunk_AllocateTempMemory Reason: Your system is not providing enough RAM to Enemy Territory. Solution: Workstation> Right-click> Properties> Advanced> Performance> Advanced> Virtual memory Or change the value 'com_hunkmegs' in your cfg 26-Ignoring md5tool queries Reason: You are disconnected from the server because Punkbuster noticed a big packet loss during a md5 check, so it could not be done. Solution 1: Check your connection (cfg and / or modem): Solution 2: The server admin must change the value of pb_sv_md5toolfreq to at least 10 (the default is 60). 27-Incorrect et.exe version Reason: You do not have the right version of Enemy Territory. There are 4 versions: - 1.02 - 2.55 (Default) - 2.60 - 2.60b Since the vast majority of the servers are in 2.60b and the competitions are in 2.60b, put the 2.6b. Install your game, then patch 2.60, then install patch 2.60b. You can install etpro 3.2.6 or download it directly to a server (cl_allowdownload 1). 28-Can not connect to a server Problem: I can not connect online, or find servers. Solutions: - Make sure you are not behind a program like a firewall. - If you can not disable your firewall, you will need to open ports 27950, 27960, 27965 and 27952 for Enemy Territory (using TCP and UDP at the same time) Other ports may be required to open depending on the server. Other problems with routers: - If you are using a router, shared connection, NAT mechanism, or gateway software, you may have problems playing online. Your router may not transfer the correct information to your machine. This problem can be solved by opening certain ports used by the game. 29-I / O error, corrupt or bad media installation Reason: - You have installed the game and you have this error message. - Your installation file is corrupt. Solution: Download the game somewhere else. 31-Losing key packets Exact message: Losing key packets. Reason: The internet connection has lost the thread, so the game stops: Update Punkbuster with "ETPbSetup.exe" 32-MD5 Tool: ET.exe md5 tool mismatch Exact message: You've been kicked by punkbuster ... MD5Tool MISMATCH: Exe.and (len = 2048) Solution: - Put the correct patch (2.55, 2.60 or 2.60b) that allows you to have the correct ET.exe - Do little housekeeping in the ETpro3.xx.pk3 version of the directory etpro then put cl_allowdownload to 1. 33-Max_Gamestate_Chars_Exceeded Reason: Problem with your server configuration - Mods that is not up to date. - Config problem - Problem of pk3 - Problem in the "campaign" After checking, reboot your server. 36-O / S Privileges Exact messages: - Insufficient O / S Privileges - Inadequate O / S Privileges - Blocked O / S Privileges Reason: Some cheats can not be detected if the player does not use an administrator account: Punkbuster therefore requires players to be administrators of their operating system to play on the servers it protects. Solution: Right click ET.exe> Properties> Compatibility> Check "Run this program in Accounting mode for: Windows xp packs 3> Check Run this program as administrator Solution 2: Update Punkbuster. 38-Runtime error Reason: Graphic driver problem.Current when changing graphics cards. Solution: The old drivers of the old graphics card have been uninstalled incorrectly. Uninstall the old driver by: - Remove / install new program. - Reboot the PC. - Installation of the last driver. The graphics card may also be defective. 40-Sv_wwwDownload: unexpected wwwdl bbl8r Reason: Apparently, there is a problem with a misconfiguration of the server.Notify the admin of the server, that it checks the installation. Solution: 44-VM_Create on cgame failed Reason: Memory size problem for the game. Not enough system memory for the game. Solution: Allocate more virtual memory allocated to Windows (or other). - Start> Control Panel> System> Advanced> Performance (Settings)> Advanced (tab)> Virtual Memory (edit) - Change the initial size of the swap file and put for example 1000MB. Do the same for the maximum size. 45-Warning Cvar whatever (= 1) must be EQUAL TO 0 Reason: A value of your config is not allowed by a server Solution: Examine the warning message, and note the offending variable. - Open the console: / set whatever 0 - Change the value of the variable recommended by the server. - Restart the new parameters by writing in the console: / vid_restart 46-Can not write to hunkusage dat Solution: - Search: 'hunkusage.dat' - The (s) remove - Starting the game - Watch if it works Source: https://enemyterritory-stuff.net/forums/topic/111-et-problems/
- 31 replies
-
- 30
-
-
-
Just giving everyone a heads up as to noted discrepancies within the servers. Primarily noted with the hardcore server: Lagging issues even with <100ms ping is becoming more prominent, especially with increased number of players. As far as a proposed solution... i'm stuck on that one. Another noted issue is what i can only describe as a light reset. the screen with fade out to black for about a second, all sound goes away and then you are glitched a few feet from where you were prior to the occurrence with objects/enemies clipping in and out for about another 2 seconds-ish until things stablize, is a repeating problem even on the same map. If any advice is out there for ways to prevent/ rectify these issues that would be appreciated and I will do my best to route them through the proper chain.
-
Well, finally I got encouraged and made a topic to try to fix my lag. I got some infos, hope someone can help me. It gets worst than the screenshots I made, my lagometer always crazy as my fps. velocidade internet.txt
-
When I look at my team mates their hp doesn't show. I don't get what's going on and I need to know how to fix it.
