Overclock Ram advice G-Skill 16Gb (8Gb x 2)

[DontShootUK]

Bought these some time ago and can never get them to overclock well over 1600. 

 

http://www.gskill.com/en/product/f3-12800cl10d-16gbxl

 

Series RipjawsX     Memory Type DDR3     Capacity 16GB (8GBx2)     Multi-Channel Kit Dual Channel Kit     Tested Speed 1600MHz     Tested Latency 10-10-10-30-2N     Tested Voltage 1.50v     Registered/Unbuffered Unbuffered     Error Checking Non-ECC     SPD Speed 1333MHz     SPD Voltage 1.50v     Fan lncluded No     Heat Spreader       Features Intel XMP (Extreme Memory Profile) Ready     height 40 mm / 1.58 inch     Warranty Lifetime

 

I am running them on an Gigabyte GA-970A-DS3 with AMD FX4170 Processor at 4.6 Ghz. Motherboard gets the auto timings all wrong and fails on the auto overclock of the RAM unless it is set to 1333 (Overclocks CPU fine) so the XMP profiles never work. I have to manually set all the memory settings making over-clocking slow work. 

 

Standard timings are 10-10-10-30 and I have got it down to 9-9-9-24 on 1600 stable but would like to get them up to 2133 or something decent. 

 

Anyone else running Ripjaws whtih similar setting who could help with latency settings for 2133, 12-12-12-36, 1.65Volts? Auto settings are suggesting really hight latency values. 

Edited July 1, 2013 by DontShootUK

[JoeDirt]

11-11-11-31-41-T1 @1.6V @2133

[DontShootUK]

No joy there, windows starts to load then reboots as I found with a lot of timings. RAM is defo 2T, didn't think you could mix and match that setting..

 

I don't seem to be able to get it over 8X RAM Multilplier, currently on  1750 by setting MB Rate to 220 (220 x 800) and working fine at 10-10-10-30-40 the shipped latency speeds but at 1.6V 2T.

 

Anyone else overclocked any 10-10-10-30 Ram or could they type out there Motherboards auto settings for me @ 2133 so I can manually enter them in mine?

Edited July 3, 2013 by DontShootUK