i would like to add that I used the Ultimate Installer, but before that I did it the old way, install ET, then Patch, then 2.6b patch.. that didnt work so i did a factory re-install then did Ultimate INstaller, from http://etui.kashu.fr/ my ISP is n-connect.. "Monticello Networks"
orginally i tried the files from http://www.planetwolfenstein.com/files/files.shtml and http://www.splashdamage.com/content/wolfenstein-enemy-territory-barracks.
So I have tried 3 different sources now. I opened console did /connect 8.2.0.28:27960 and still get awwaiting connection.. opened console and it says PunkBuster Client: Connected to Server 8.2.0.28:27960... i get the same type of message when I try different servers from a list I found online. same with ur servers too.
Here are some pics of the setup if it helps get you a better understanding...
http://i53.tinypic.com/2yyzc77.jpg "as you can see there is the adapter and that red cable is feed to a box, that grey Cat cable goes to printer so that isnt an issue"
http://i56.tinypic.com/2hem1yc.jpg "cant see it that well but one says "To Computer" and the other says "To Radio""
http://i55.tinypic.com/vymrg9.jpg "that red cable from the adapter/router goes to this box, now I assume the little green cable is power, and the black i pressume goes to the antenna on thee roof.
I read this at another forum, you think this could help? Normally you get a loading screen where you see: awaiting challenge and after that the awaiting gamestate line, but sometimes you get this message for more than 10 minutes (awaiting gamestate xxx ; awaiting challenge xxx).
A solution that may fix the problem;
Go to the directory; C:/Windows/System32/drivers/etc (depending on which drive you installed Windows) In the directory ‘etc’ you will find a file called; ‘hosts’. Open the file and choose wordpad or another text editor to open the file with. Now add a new line and type; 192.246.40.62 etguidauth.evenbalance.com Save the file after this.
Now go to the directory; C:/Program Files/Wolfenstein - Enemy Territory/pb (depending on where you installed Enemy Territory) In that folder delete the file; ‘pbns.dat’, and run the program; ‘pbweb.exe’. Wait while PB updates itself (this may take a while) and you are done.
I have already ran pbsetup after i installed everything and it did update it. I looked in the pb folder and see no pbns.dat but a pbns_c.dat. and there is no pbweb.exe in that folder either, but i just read that pbweb is discontinued at now its pbsetup.
I ran the pbsvc.exe and get this
Starting PunkBuster Service Tests (v0.991) (05/28/11 21:59:17)
Checking OS
Windows NT 6.1 (build 7601, Service Pack 1) 64-bit
Checking PnkBstrA service status RUNNING
Checking PnkBstrA Version OK (1034)
Extracting "PnkBstrB.exe" to:
"C:\Users\Frieden\AppData\Roaming\PnkBstrB.exe"
OK
Checking firewall settings OFF
Checking if PnkBstrB is running STOPPED
Getting port for PnkBstrA OK (44301)
Opening socket for packet send OK
Sending version packet to PnkBstrA SENT
Receiving version from PnkBstrA OK
Received 6 bytes from 127.0.0.1:44301
Response = 7722 (ms) Version = v1034
Getting PnkBstrB install instance OK
Sending start packet to PnkBstrA SENT
Waiting for packet from PnkBstrA OK
Received 3 bytes from 127.0.0.1:44301
Response = 15366 (ms) PnkBstrB started.
Load SUCCESSFUL.
Watching for PnkBstrB instance change (3) CHANGED (4)
Getting port for PnkBstrB OK (45301)
Sending version packet to PnkBstrB SENT
Receiving version from PnkBstrB OK
Received 5 bytes from 127.0.0.1:45301
Response = 3276 (ms) Version = 2202
Checking PnkBstrK driver status NOT FOUND
Manually stopping PnkBstrB STOPPED
Removing test PnkBstrB file OK
----------------------------------
Tests finished.