Jump to content
  • 0
-=HipKat=-

Problem connecting to Jay 1

Question

In an effort to fix my FPS lag, I set up port forwarding and have no problem connecting to any other server, except Jay 1 - Just says Waiting Connection, as if the server is down.  ONLY Jay 1. Any other F|A server connects, no problem.

 

Here's how I Set up PF. I didn't know what to put in Application name or computer name (Only my wireless devices show up in computer name).

 
Capture_zps4tkyfydt.jpg

 

THis is what I get in console when I try to connect to Jay 1

 

01_zpsliyybogl.jpg

 

Here's my Speedtest

 

Capture_zpskw0ryp4p.jpg

 

Here's when I ping Jay 1

 

Microsoft Windows [Version 10.0.10586]

© 2015 Microsoft Corporation. All rights reserved.
 
C:\WINDOWS\system32>cd ..
 
C:\Windows>cd ..
 
C:\>ping jay1.clan-fa.com
 
Pinging jay1.clan-fa.com [8.9.4.227] with 32 bytes of data:
Reply from 8.9.4.227: bytes=32 time=7ms TTL=58
Reply from 8.9.4.227: bytes=32 time=7ms TTL=58
Reply from 8.9.4.227: bytes=32 time=7ms TTL=59
Reply from 8.9.4.227: bytes=32 time=7ms TTL=58
 
Ping statistics for 8.9.4.227:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 7ms, Maximum = 7ms, Average = 7ms
 
C:\>
 
Here's my WinMTR
 
|------------------------------------------------------------------------------------------|
|                                      WinMTR statistics                                   |
|Host              -   %  | Sent | Recv | Best | Avrg | Wrst | Last |
|------------------------------------------------|------|------|------|------|------|------|
|192.168.60.1 -    0 | 1043 | 1043 |    0 |    0 |   14 |    0 |
  No response from host -  100 |  209 |    0 |    0 |    0 |    0 |    0 |
|No response from host -  100 |  209 |    0 |    0 |    0 |    0 |    0 |
|xe-0-2-0-23.r05.chcgil09.us.bb.gin.ntt.net -    2 |  976 |  959 |    6 |    9 |   92 |    6 |
|xe-0-1-0-5.r05.chcgil09.us.ce.gin.ntt.net -    0 | 1043 | 1043 |    6 |    9 |   51 |    7 |
  8.9.4.227 -    0 | 1043 | 1043 |    6 |    6 |   32 |    7 |
|________________________________________________|______|______|______|______|______|______|
   WinMTR v0.92 GPL V2 by Appnor MSP - Fully Managed Hosting & Cloud Provider

 

The ONLY way I can connect to Jay 1 is in console type

 

pb_sv_guidauth 0

net_port 0

net_port restart

reconnect

 
 

Bottom line is, this DID fix my FPS lag. instead of my fps flickering all the time between 125 and 40 something, it stays between 1225 and 90 something now

Any ideas?

Share this post


Link to post
Share on other sites

3 answers to this question

Recommended Posts

  • 0

Opening new ports will allow packets to travel a different route. This route may be flawed. You should close the ports you have opened. It is extremely unlikely (impossible? I'm no expert) that your FPS lag could be fixed with port forwarding. If it could, it's not FPS lag.

Share this post


Link to post
Share on other sites
  • 0

Seems like this problem had corrected itself anyway. All of a sudden, it just stopped happening.

 

You could be right. Port Forwarding is something I read on the recognizing your lag thread

Edited by -=HipKat=-

Share this post


Link to post
Share on other sites
  • 0

Grr, all of a sudden, I have this same problem connecting and the commands I used last time {pb_sv_guidauth 0, etc) aren'tr working... wth??

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×