Jump to content

Software

Software/addon for Wolfenstein Enemy Territory.

62 files

  1. Enemy Territory Full Version

    Wolfenstein: Enemy Territory (also referred to as simply Enemy Territory, ET, or W:ET) is a free and open source multiplayer first-person shooter video game.
     
    System requirements
    600 MHz CPU
    128 MB RAM
    32 MB OpenGL graphics card
    56.6k Modem/LAN
     
    Wolfenstein: Enemy Territory is a downloadable, free-to-play multiplayer game in which players wage war as Axis or Allies in team-based combat. It's a team game; you will win or fall along with your comrades. The only way to complete the objectives that lead to victory is by cooperation, with each player covering their teammates and using their class special abilities in concert with the others.
     
    Featuring multiplayer support for up to 32 players, Wolfenstein: Enemy Territory is the ultimate test of communication and teamwork on the battlefield. Players join the fray as one of five distinct character classes each with unique combat abilities. The Covert Ops can steal the uniforms of fallen enemies and perform covert reconnaissance behind enemy lines, while Engineers can plant and diffuse land mines as well as construct battlefield structures including bridges, guard towers and forward operations bases in the midst of combat to gain advantages for their team. Medics provide health and revive fallen teammates, as Field Ops use their binoculars to mark enemy positions for a Soldier's mortar barrage. Each Axis or Allies team can divide itself into smaller fire teams for quick and easy communication using an intuitive messaging system and dynamic command map of the entire battlefield.
     
    No longer does winning a single battle win the war. In Wolfenstein: Enemy Territory multiple objective-based scenarios are linked together over the course of three maps to form a campaign where teams struggle for successive victories. Throughout a campaign, players gain experience in categories like battle sense and light weapons as well as their class specific abilities, each of which persist and accumulate over the course of the campaign. As players reach higher levels in each of the seven categories they are awarded with enhanced abilities as well as battlefield promotions that are represented as ranks on each players helmet. The 28 enhanced abilities range from higher ammunition capacity and faster power-bar recharge times, to the ability to see land mines, revive fallen teammates at full health or use a machinegun instead of a pistol as your secondary weapon.
     
    In addition to objective and campaign modes, Wolfenstein: Enemy Territory introduces a team-based Last-Man-Standing game mode, where squad-mates cooperate to ensure their team has the last surviving man on the battlefield. Additionally, Splash Damage has created a new terrain foliage system that allows players to hide or take a sniper position in the cover of long grass or snowy mountaintops. With numerous game modes, epic campaigns, persistent character progression and an arsenal of overwhelming firepower including land mines, mortars, mobile MG-42s and a silenced sniper rifle, Wolfenstein: Enemy Territory will have players battling in the trenches for hours.
     
    Download the game, install it and fire up ET.exe and join server. You can open the console using "~" key and directly connect to server using:
     
    \connect jay1.clan-fa.com
     
    You can also find our other community servers here:
     
    Fearless Assassins Gaming Community Enemy Territory Servers

    14326 downloads

    Updated

  2. ET Masterlist hacking and redirect fix for players

    ET (Enemy territory) has been messed up lately with master list redirect and hacking issues. In order to stop it, please download the ET.exe and replace your current one. Patch is for all ET players playing from Windows OS.

    Steps - 
    1. Download the 2 file ET.exe and ETPRO.exe. 
    2. Replace the ET.exe with the downloaded ET.exe.
    3. Use ET.exe to play on all mods except ETPro. For playing on ETPro mod, use ETPRO.exe.
     
    Please share this file to all your friends and ask them to patch their ET with this one. Please report on forums for any issues, if any.
     
    Note - New patch will also stop players redirecting from fake ET redirect servers. It's about time we focus towards good gaming experience for all new ET players. 
    Note 2 - If any new issues, we might try to fix that as well or revert back or provide complete new patch. So please subscribe to this file download. If file gets updated you will get notification, so you can stay up to date.
     
    IMP Note - Please don't download the file from other sites or source, as some may try to inject virus/trojans and spread the copy of it. I take full responsibility of this file on our website and 100% guarantee it doesn't have any back-doors. So my humble request - please be careful i.e. from where you download the files and what servers you play on. 
     
    Update - 10th Oct 2018 - zip file updated to block redirect on default ET.exe itself. If you are using ET.exe from download to play you don't need anything else. If you are using ETPRO.exe or default 2.6b Installation ET.exe - Please download generic_redirect_fix.zip and put both .dll next to your ET.exe installation. Instructions are available in Read Me.txt of the zip file.
     
    PS Long live ET where we have made some life long best friends. ET for next 50 years till it becomes legacy like super Mario

    20311 downloads

    Updated

  3. RCON Unlimited Tool For Enemy Territory

    This is rcon unlimited. A rcon tool for Wolfenstein: Enemy Territory. You can easly acces the server's rcon with this tool. You can send commands and change settings with the program.
     
    You only can't read visitors messages wich they say on the server.
     
    Rcon Unlimited is designed to be the next generation of remote control of Q3 powered servers. Most Servers admin have heard of (or used) Rcon Commander. This program is designed to be the replacement of Rcon Commander, giving you many more options and abilities.

    3501 downloads

    Updated

  4. W:ET Minimizer

    Easily minimizes your enemy territory game. Unzip to your desktop(or location of your choice), open mini folder, double click mini.exe and click run(if your pc asks). Also, if you are running windows vista or 7, you should right click on mini.exe and run as administrator. Always run mini.exe before you run ET, I have it in my startup so it opens when I turn on my pc. Then, when ET is open, just hit alt+z to minimize and hit alt+z to maximize again.

    2487 downloads

    Updated

  5. |H*S|Patch Selector

    This Program was made by Burgo855 for the game 'Wolfenstein - Enemy Territory'.
    It is made for players to easily navigate through all versions of Enemy Territory with the ease of a mouse click.
    There are many patch selectors out there, a lot of them do not function one hundred percent correctly.
    Burgo uses a new patch system that is made specifically for Windows.
    If you wish to contact the creator or find out more use the 'Credits' and 'How To Use' Buttons.
     
    - This program also allows the user to generate a new valid etkey and also allows the user to update their PB to the latest version.
     
     
    Thanks for downloading & supporting this program.

    307 downloads

    Submitted

  6. aimTrainer

    A software which can help to improve your aiming.

    608 downloads

    Updated

  7. BIND CREATOR

    ET: BIND CREATOR v. 1.0.0.2

    423 downloads

    Submitted

  8. Bind Creator (1.0.0.2) - systhernsbindcreatorv1.0.0.2.zip

    Download file name : systhernsbindcreatorv1.0.0.2.zip
     
    SYSTherns Bind Creator V 1.0.0.2
     
    This simple tool let you make your own binds for Enemy Territroy: Wolfenstein.
     
    Add Functions(like SayTeam or Reload), Sounds(like Affimative),
    Colors and Counters(like your last kill) to your bind and add it then to your cfg!

    345 downloads

    Submitted

  9. BooBoo DemoPlayer

    Software which allows to look his demo easily
     


    238 downloads

    Updated

  10. Caps Key remap Registry file

    this file contain:
     
    ChangeCapsToControl.reg
    ChangeCapsToShift.reg
    KillCapsLock.reg
    SwitchCapsToScrollLock.reg
    This one reset the maped keys to Default ---->DisableKeyboardRemap.reg

    304 downloads

    Submitted

  11. config generator

    Software to create enemy territory config. Please see tutorial:
     
    How to create enemy territory config

    1627 downloads

    Updated

  12. Detector

    Detector is a platform independent tool which provides the ability to search Jaymod user.db files for bans with a 00:00:00:00:00:00 MAC address. It is able to read and handle several user.db files at once, which could either be added through the intuitive user interface or a file list for your comfort. Additionally, Detector allows you to export your results into a text file for further use and could easily handle more than 100.000 entries.
     
    http://fearless-assa...o-use-detector/

    162 downloads

    Updated

  13. Driver Signature Enforcement Overrider

    The default 125Hz USB sample rate in Windows Vista and Windows 7 is not enough for today’s gamers and end-users. There are many USB sample rate patches out there, but none of them support Windows Vista and Windows 7, due to a new restricted driver signature enforcement feature. Now it is possible to use these patches. These patches and these tools have been well tested, but I am not taking responsibility for any damages! Use it at your own risk.
     
    1. Download Driver Signature Enforcement Overrider.
    2. Extract the file.
    3. Run "dseob13b". Choose and execute "Test Mode". Wait a bit, then "exit". Now reboot your PC..
    4. You should notice and see a script "Mode test windows 7 version 7600" who appeared in the right down corner.. Don't worry we will be able to remove it at the end..
    5. Go in the HIDUSBF’s folder, right click on "HIDUSBF.inf" and choose to install. In the same folder run the "Setup.exe".
    6. Click to enable "Filter On Device" at left down corner of the window and choose the poling rate (hertz) wanted. Be aware that a high value could slow your PC.. Recommended: 500 Hertz
    7. Cick on "Install Device" and then close it with "Close".
    8. Run again "dseob13b". This time choose and execute "Sign a File". Copy/past this: C:\Windows\System32\Drivers\HIDUSBF.sys (can be different if the OS is installed on an other disk with a different letter)..
    9. Reboot again your PC.
    10. Verify by using Mouse Rate or DirectInput Mouse Rate (attached below as mouserate.exe and dimr.exe)
    11. If you would like to remove the test mode watermark, run "dseob13b" and choose "Watermark removal" to get the whole instructions. Extract and run "RemoveWatermark" corresponding to your OS (takes some time).. Reboot your PC..
     
    Note: "dseob13b" requires administrative privileges (Run as administrator).
     
    That should do the trick. Remember! Use it at your own risk! Don't blame me if your motherboard explodes. But... I already tested it myself, with a lot of success, so you don't have any reason to worry about . If you would like to uninstall it, just right click on HIDUSBFU.inf, choose Install and disable test mode from "dseob13b".
     
    Supported OSes:
    -Windows Vista 32bit/64bit
    -Windows Server 2008 32bit/64bit
    -Windows 7 32bit/64bit
     
    source: http://www.ngohq.com...-vista-7-a.html

    810 downloads

    Updated

  14. DynoCounter

    Here is a small simple software has to use which gives us a timer onto bombs put.
    To use it in games, open the software and play !!
     









    180 downloads

    Updated

  15. Enemy Territory - Modified client file

    I have recompile et.exe from source code to optimize for dual and quad core processors
     
    just replace ur older version of wolfe.exe with this one.
     
    its still in alpha version, so pls dont mess up ur main wolfet. this is just for testing and reporting any bugs and crashes
     
    only tested in windows xp, not in vista or windows 7
     
    more changes to come, stay tuned !!
     
    Note: Use it at your own risk.

    163 downloads

    Updated

  16. Enemy Territory Map Editor

    This will allow anyone to create maps and content for Enemy Territory. Please note, these tools are not supported by Activision, id Software, or Splash Damage.

    187 downloads

    Updated

  17. Enemy Territory Window Control

    ETWC
     
    This application allows to minimize the full screen of:
    - Jedi Academy SP/MP
    - Jedi Outcast SP/MP
    - RTCW
    - ET
    - Elite Force
    - Wolfenstein SP/MP
    and many other games
     
    1. Unzip the file and open the ReadMe.txt (no install needed)
    2. Read the instructions.
    3. Open the program and have fun using it!
     
    Greetings,
    Mayhem

    212 downloads

    Submitted

  18. ET 2.60b PATCH ( ALL OS )

    Note : Tested on W:ET 2.60 Setup - Windows 10 (32 bit)
    Note : Tested on W:ET 2.60 Setup - Windows 8.1 (32 bit)
    Note : Tested on W:ET 2.60 Setup - Windows 7 [ Home Edition /Ultimate /Professional ] (32 bit)
    Note : Tested on W:ET 2.60 Setup - Windows XP [ Professional ] (32 bit)
    Note : Tested on W:ET 2.60 Setup - Linux ( Ubuntu ) (64 bit)
     
    About : This File will transform your ET 2.60 Setup To ET 2.60b without losing Anything !
     
    Procedure :
    Download "Enemy Territory 2.60b patch" and Extract it. After that Open the Folder and Open Linux for Linux Users / MacOSx for MacOS Users / win32 for Windows Users. For Windows Users : Copy and Paste "ET" and "ETDED" in your Game Root Folder. When it says Replace press Yes For Linux Users : Copy and Paste "ET.x86" and "ETDED.x86" in your Game Root Folder. For MacOS Users : Copy Everything Under "Wolfenstein ET.app" and Past in your Game Root Folder. When it says Replace press Yes

    1580 downloads

    Updated

  19. ET Demo Stats

    --------------------------------------------------------------------------
    DEMOSTATS 1.0 by SunLight - Readme
    --------------------------------------------------------------------------
     
    This little tool will extract some statistics from a Wolfenstein-ET demo.
     
    It is fully working *only with etpro demos*, but jaymod demos and silent mod
    demos are partially supported.
    So you will get full headshots and damage statistics only with etpro demos.
     
    --------------------------------------------------------------------------
    Linux version is command line only, example usage:
    $ ./demostats demoname.dm_84 | less
     
    --------------------------------------------------------------------------
    Windows version has both a command line version (demostats.exe)
    and a gui (demostats_gui.exe).
     
    Since Winblows console sux hard, I decided to put a gui , so if you use Win
    run the gui, and drag and drop a demo file inside the window.
     
    (note: demostats.exe must be in the same path as the gui)
     
    --------------------------------------------------------------------------
    Some infos about the stats:
     
    - damage is only bullet damage, no grenades or any explosive weapon is counted
    - 1on1 damage is when both players didn't receive damage from others
    - accuracy under fire and 1on1 is higher than the one shown by the game because
    gibbing is not counted, and prefire as well
     
    It's based on a test mod I had made years ago, probably nobody will find it
    useful, but some (me, for example) might want to know if they just suck in 1on1
    and accuracy, or they are just crossfired from all sides
     
    enjoy
     
    p.s.
    no installation is required, just put the files in some folders

    159 downloads

    Updated

  20. ET Minimizer 0.91

    Software name : ET Minimizer
    Download name : et_minimizer_0-91.zip
     
    Simply a minimizer for Enemy Territory!
     
    Unzip "etmin.exe" and optionally the TeamSpeak registry template to
    your computer. Create a shortcut to etmin.exe from your desktop and
    execute the shortcut to start the minimizer (which will load W:ET
    automatically).
     
    Read the readme.txt file into the .zip file for full Installation Instructions.

    2944 downloads

    Updated

  21. ET patch 2.60

    Once you install 2.55 patch, download the 2.6 exe and run it.
     
    It will patch your game to 2.6 version. Once that is install replace the ET.exe with 2.6b ET.exe.
     
    Note: Start your game as an admin to avoid game/pb issues.
    Right click -> Properties -> Run as Admin.

    738 downloads

    Updated

  22. ET patch 2.60b

    after update to et patch 2.60 you have to copy paste the et and eted files in your wolfenstein folder.
     
    in this zip file you have:
     
    linux files
     
    win32 files
     
    macosx files

    1679 downloads

    Updated

  23. ET Player Model Viewer

    This app is usable on Linux Mac and Windows it does require Java to run it.
     
    The installers for Linux Mac and Windows is included.
     
    You will need to point the browser to the etmain folder only.
     
    Do note this app is still available only on one site and is a useful tool for modders just encase it goes down to https://www.gamefront.com/games/wolfenstein-enemy-territory/file/et-player-model-viewer
     

    274 downloads

    Submitted

  24. ET Starter Pro 0.95 - etstarterpro_095.zip

    Short description: ET Starter Pro (ETSPRO) is an external third party utility for Wolfenstein: Enemy Territory gamers. Read the full description
     
    Description:
    Integrated patch selector - no more .bat files or multiple icons
    Lets you manage a list of favorite servers, together with game version and private slot password (optional) and connect with one mouseclick
    Built in server query tool, displays server information as well as a player list of the actual servers
    Built in serverbrowser for all 3 ET versions (2.55, 2.56, 2.60) that lets you add your favorites easily or join a server directly
    Lets you automatically start ET Minimizer when starting ET
    Lets you automatically connect to a Teamspeak server when starting ET
    Lets you automatically delete your etkey file when starting ET, to avoid common Punkbuster errors
    Lets you automatically start a user defined application together with ET
    Lets you automatically terminate user defined applications when starting ET (for example MSN Messenger, Trillian, etc.)
    Takes etspro:// links from websites to directly join servers from any browser (Syntax: "etspro://server=ipstick out tongueort&version=version")
    Lets you import and export your configuration to backup server list and settings
    Lets you define player highlight tags
    Added Ventrilo support
    Gamma fix option to reset gamma after ET crashed
    ET Pro Demo Tools - Cleans up your etpro directory to avoid demo playback errors and lets you watch etpro demos easily
    Added server browser filters
    It is now possible to execute each starting step individually
    Lets you automatically delete profile.pid files when starting ET to avoid configuration resets
    Added ability to add custom starting prarameters for starting ET locally, for example to start a mod
    Lets you backup and restore etkey files
    Added support for 2.60b
    Minimizer now also startable when not connecting to a server
    Updated PND server addresses

    759 downloads

    Updated

  25. ET-Tweaker

    Features:
    - Over 30 easy to understand CVARs to modify, with detailed descriptions, and easily selectable options.
    - Ability to create your own 'say' and 'vsay' binds, as well as a combination of both.
    - Pre-Made Default Template.
    - Exclude any CVAR you want from your config file.
    - Graphics Quality and Relative FPS graphs, to show how modifying a certain CVAR will affect your game play.
    - Easy Wizard style layout, with different stages (Example: View Settings, Gun/Crosshair Settings).
    - Ability to add "foreign" CVARs to your config. file.
    - Add useful ET scripts to your config file, such as akimbo scripts, and set up Class binds with the Class Selector.
    - On screen keyboard – no need to remember the bindable key names anymore.
    - Easily saves to your ETMain folder by a one-click save function, for simple initialization.

    462 downloads

    Updated


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.